Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Can anyone post pictures of the weber 32/36 carburetor on an iron duke gm 151 please? Having problems with linkage as well as overall setup. I know it's not a common engine. thx
I have a 32/36 on my 258. Its a good carb but it needs a lot of setup. I tried rejetting it half a dozen times and it's close but still not just right. Some day I'm going to get a tune on it.
PS... You might want to save your money because the Webers add nothing to the performance of these older engines.
Yep the 151 has the manifold and carb on the passenger side and the setup is a bit different. Definitely in need of some 151 pics to complete mine. I'm going to call Redline most likely but hoping for a some pics here as a hail mary. Nice job on your projects by the way. Our 81's are similar minus the engine of course :/
Jeeperdd, I ordered up the linkage kit. It looks like it will work, thank you! Also, could you post a pick of the hoses on the waterpump and thermostat? I'm not sure where they go. I know one runs to the intake (short one) and the other to the firewall / heater (long one), but not sure which goes where.
Jeeperdd, do you remember what you did to make the throttle cable work for the new linkage? It looks like some coax cable nut and bolt or something that you have connected. I'm assuming you spliced the old throttle cable?
Thanks zr10054 but I think that's for the AMC 258 not the GM 151. I spoke with Jeeperdd and he said that he believes it was a redline universal throttle that he purchased so I'm going to try and out and see how it works!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.