I'm working on a fuel tank leak in my 1982 Scrambler. It has the 20 - 21 gallon (opinions differ) HDPE tank. No OEM replacement is available. The skid plate was dented by a previous owner but has only recently, 15 years later, developed a leak. Many folks recommend epoxy, but so far as I can tell no epoxy manufacturer claims that it's product with bond to Polyethylene. Most of their websites say they won't bond to HDPE. The leak, of course, is at the bend of one of the right angle corners, further complicating an epoxy repair. There are a number of YouTube videos showing how to weld HDPE and I think it is a legitimate process that would probably work for me. The welding consists of using a soldering iron to liquify the plastic at the leak site and then welding with another HDPE source like strips from a milk jug or oil bottle. Has anyone had experience with this? A major concern is a gas fumes explosion. This seems unlikely to me since there would be no open flames, but from what I can find out the temperature of even a 25 watt soldering iron exceeds the ignition temperature of gasoline. Bottom line is I want a permanent fix so I can avoid dropping the tank and skid plates again, but don't want to kill myself.
I will of course drain and rinse the tank no matter what. I've also read that dry ice will displace gas fumes, which sounds like a simple way to be on the safe side. Another interesting idea recommended on a farm tractor forum is to rinse the tank with diesel fuel.
Thanks for your thoughts - Bill
I will of course drain and rinse the tank no matter what. I've also read that dry ice will displace gas fumes, which sounds like a simple way to be on the safe side. Another interesting idea recommended on a farm tractor forum is to rinse the tank with diesel fuel.
Thanks for your thoughts - Bill
