• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What comes first - the cosmetic or the Mechanical

JeepJim

Loves Jeeps
I am hoping to find a rolling chasis in good condiction (I have a post in the classifieds advertising my need), then dropping in a modern EFI 4.0 engine.

(This seems like a good way to get a dependable daily driver at a reasonable cost, right?)

I have 5 kids and I want a jeep bad.

(I had a jeep about 5 years ago, but sold it when I got married. I have missed it everyday since and finally have figured out that my desire for one isn't going to "go away")

So a scrambler seems obvious to me because I could throw on:

-- a full cage
-- more seating
-- maybe a full hard top

....and be with my kids and with my jeep.

Do I paint, rhyno line or hurculine or duraline, install the cage, install the seats prior to drivetrain? Or do I get it running and drive it around while it is going thru its metamorphisis?

Which is more practical and easier? I am very patient, so as long a there is some incremental progress, I don't care how long it takes.

Also, as far as the seats go would a bench seat (pickup style) with room for 3 work (preferred) behind the rear wheel wells or would I need to go with (2) seats facing each other parrallel to the sides over the wheel wells. (I don't think I would like how that would look.)

Also again, Has anybody ever thought of or tried bed lining over the entire exterior? (Scratches wouldn't be an issue and it would last awhile!)

Any advice is appreciated.

BTW, I am in So. Calif. so the top won't be on very much. My last jeep didn't have the doors or top on once between the time I bought it and the time I sold it (2 years). A little rain won't make you melt!

Thanks
 
RE: what comes first...

As far as seating for six...you can just add two regular cj bench seats both facing forward in the back. The 2nd rear seat works well for smaller children and teenagers, but would not be all that comfortable for adults for a long trip. There are some earlier threads on this topic that show pictures of the "safari style" seating that you described. I am going to try and post a hyperlink that you may find useful below (by the way, I got this URL off of Aggie Scrambler's website...nice jeep, Aggie!). I hope it works, otherwise, click on the "members button at the top of this page, and scroll down towhere you can get to Aggie Scrambler's website from there:

http://www.angelfire.com/fl4/scrambler/SeatTalk.htm


Regarding lining the tub: I have the entire tub lined inside (black) and outside (white) with a product called Ameriguard (basically a heavy-duty poly/paint textured spray-on lining). It is only on the tub, not front clip or doors. I have seen some posts on this site where some people don't like the look, but I love it and I ALWAYS get favorable comments on it. also, it works great for no scratches when going off-road (well, It didn't hold up to my bent bumper knocking a chunk out of it when I did a bit of taildragging over a rock, but that's another story). Anyway, it's nice to crash through some brush without worrying about the paint, and still have it looking good when I'm back on the road.

Good luck on finding the right scarmbler for you!
-Mike
 
Hey Jim -

Here is what I have done on my 8:

1. Purchased 4 years ago this month. Original, rustfree, driveable condition from Arizona. Drove for 6 months...stored for 3.5 years.

2. Rebuilt engine/trans. Rebuilt 258 stock with Weber carb/T5 trans. Detailed/painted engine compartment while engine was out. Used POR 15 on frame. Re-installed.

3. Rustproofing/undercoating for the frame, undercarriage and wheel wells.

4. Interior Rhinolining - front to back (This week)

5. Exterior paint (Next week)

6. Full soft top/rear seat (future)

My thinking is that any overspray from undercoating and rhinolining wont ruin a new paint job. I havent had much luck removing my roll bar - so make a decision if you will paint or rhinoline before installation if your using a full. I have seen a completely linned Jeep inside and out...I have to admit it looks cool and would be super durable. Just didnt want to do that to my Jeep. I like open air so the full hard top isnt an option right now...too much of a pain to take on and off.

Well thats my 2 cents...

Best of luck!

Muger
 
Just my two cents here if your going to drive it while your working on it two things to consider-first and most important is saftey-if the kids go that means seats,seatbelts,and rollcage and 2nd but no less important is mechanical shape of the Jeep-brakes,steering and drivetrain-the pretty can come later-JC :p
 
So I Guess.....

--I have to go Safari Style seating
--Get the Mechanical done before the cosmetic
--Bedliner looks cool on the exterior


Now, just to find the vehicle candidate!

(Maybe I should buy a fairly complete CJ-8, and enjoy it while I incrementally improve it?)

As far as the seating goes, It looks (from the link above) like the Safari style example picture is using custom benches.

Should I be worried about the knee-knocking that is sure to go on if I find (2) pickup truck bench seats and put them back there?

Is there a reasonable aftermarket bench seat for this? Maybe one that folds up to give me back my bed, or to allow passengers to ride on only one side with more room?

Also, I have heard that bedliners are bad because they trap corrosive elements between the spray on liner and the original bed finish. Is this substantiated?

Thanks
 
If your going to use a liner you'll have to just about go to a spray or roll on-do the spray less work and have a good shop do it-the liner bonds to metal that it is sprayed on and forms a water tight seal so there is no way anything can get under it,there is also and added bonus as it will act as a sound deadner also-as far as the rear seats go thats easy-use cj-7 rear seats you can put two of them in the back facing forward and have room for 4 kids in the back and 2 adults in the front-6 total-you can use the fold and tumble rear seats,you may have to fabacate a few brackets and don't forget the seat belts-on some scramblers the back seats bolt in with no trouble-i've seen several scramblers set up this way and there is still room for a small amount of gear to be hauled also-JC:p
 
Seating

I love the seating in the link provided above on the white scrambler with the full rollbar. I emailed that guy and asked him how he did it (types of seats, etc) and he wouldn't tell me! The nerve! Anyone figure it out...it looks damn good
 
I've gotta go with the Safari Style - I have five kids. Me + Wife + 5 kids, need seating for 7.

What reason did the guy give for not telling?

Jim
 
After taking a close look at those seats, they look like seats out of a school bus (the older one's with shorter back seats). That would be just about the right width too! They would have a flat bottom for mounting on those old tubular frames in the bus and be VERY cheep to aquire. Just recover and your there. I'm sure you could modify the back to fold down with a little cut'n and weld'n... wish I had a welder and knew how to weld:mad: .
 
I've run into the "don't want to tell you" thing many times in Harley circles. I tracked down a guy that made an extended swingarm that would allow a 200 mm rear tire on a Buell X1, but my Dealer told me not to expect him to give up the info. People put a lot of time and effort into custom stuff and don't always want everybody to benefit from their sweat for nothing in return. I'm not saying they're looking for money (though most would take it), but rather recognition and that priceless "cool" factor.
 
"wish I know how to weld"

Hey JL in CA, if you really want to learn how to weld check out your local technical school. They usually offer night classes to the public.
 
Back
Top