• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What tire size/gears are you running?

craveman85

CJ-8 Member
City
Dolgeville
State
ny
I've been thinking of what tire size I want to go with on my 8 when I get to that point. So I thought I'd ask what gears and tire sizes you guys are running, what engine, how you like them, what gears you'd like in them. My use is going to be 95% on road. I've got 3.73 in my factory narrow Trac axles and I'm planning somewhere from a 31.5-35" tire with a 4 speed and 351w.
 
Will you be doing much freeway driving? If so, you might want to run some tire/gear calculations that will give you decent RPM and speed in fourth gear.

Here's a good calculator to play around with: https://www.ringpinion.com/Calculators/Calc_RPM.aspx .

With a V8, I'd say your 3.73s are probably good for 33" tires. 35s would probably work fine too, but 35s seem to be the tipping point where a lot of other parts start to wear funny and fit funny, need extra lift (especially with narrow tracs), etc.

Don't forget, your transfer case will give you "trail gears" if you need them.

I'm running a 350, 4-speed, 4.10s, and 32" tires (about 1/2 tread). I love the way it drives around town, but it really winds up at freeway speeds. I'm not going to change out my gears... but for my uses, I'd be happy with 3.73s.
 
I'll be about 2500 rpms@ 65. That's about the same as my ranger with 29s and od so it should be good. I'll never really need to go faster than that if even that fast. I see some people run 273 and 32s with a 6 or even low 3s. I don't see how those people can live with those gears.
 
My most likely tire sizes will be 235/85r16, 255/85, or 33x10.5. My favorite size is 235/85 but I'd really like a little taller. If they made a 235/85r18 I'd be all over it
 
I run 33x10.50x15's on my TJ with 3.73. That is a little steep with a 4.0l and the stock cam. I suspect with a RV cam or a 258 style cam it would be perfect. On the CJ-7 I run 32x11.50x15's with a T-176 and a 258 and that is a good combination. But the Inline 6's really like a low RPM. With a V-8 they need to wind up a little more kind of like the later 4.0ls

I would say that you can get by with the 3.73's for now and see how you like them and then maybe later move to a 4.10 or 4.27 gear. If you are looking at 35's teh 4.54 may not be out of range.


Carl
 
I'll be about 2500 rpms@ 65. That's about the same as my ranger with 29s and od so it should be good. I'll never really need to go faster than that if even that fast. I see some people run 273 and 32s with a 6 or even low 3s. I don't see how those people can live with those gears.

I have 2.7.3 with my 31's. It's not that bad for cruising around with my wife, but a fools game (to quote her) driving the hills of West Virginia. My next major task is the regear.
 
I'll have to see if I could find the dyno chart the guy had again but I think I'll be looking at 300@ 2000rpm with a peak of about 350 and 320 hp
 
I have 4.56 gears with 33x12.50 tires. I planned on going back to 35's so the 4.56's were the way to go for me. I do little to no highway driving, too afraid I won't make it to my destination!
 
31" tires and 3.31 gears (T-5 transmission). I love this combination. Great for taking off at a stop light and the overdrive for highway.
 
Maybe you should take care of that. There really isn't anywhere to wheel around here. I'm on the edge of the adirondack park in ny and any off roading isn't really allowed except private land. Actually I think 4 wheelers aren't allowed at all on state owned land anymore. 32-33s would be most suitable for me. I don't think 35s would be fun on these windy hilly roads.
 
37 X 12.50 Mud Terrains with chevy 327 and 700R4 and 456 gears, considering a terra low kit for the 300. Its not done yet, so have not driven it with this combo, but this is what I'm going with.
 
I'll be running 5.13's with 40" tires, TH400 and an NP241 rocktrac t case from an 08 rubicon. I had these axles and gears in a JKU with 38.5" tires and found I'd have been better with 5.38's, as 6th gear was still a little hit or miss. It'll be interesting to see how this combo is, not that it'll hit the highway that often.


 
BFG 33's with 4.09 gears, 360 AMC and TF999 trans. Goes well with reasonable road rpm. Works well off road with 4:1 gears in the transfer case for low range.
 
Ended up swapping a friend with a tire business my amc360/tf auto trans for a brand new set of 4 35x 12.5 km2s. I had my heart set on 33x10.5 but I can't beat clearing up space and recouping the 300$ I spent on those parts. I'm thinking they shouldn't be too bad with 3.73s and a 4 speed.
 
You should be fine with that setup. It might get a little sluggish on the hills but you've got the horse power to put to it. Gas mileage might be affected but that's not why you drive a Scrambler with a 351. I'm running 35's with 430 gears and a 4:1 reduction in the t-case, Hemi with 545RFE (5spd auto). And nice score on those tires! You'll enjoy them.
 
Back
Top