• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1985 cj8 build

I love UPS

That's right I love when Ups and Fedex show up with things I've ordered.
Today was a good day. I ordered an atlas II for the cj8 build to overcome
the front driveshaft clearance and it showed up today.

DSC01183-1.jpg


DSC01184-1.jpg


DSC01185-1.jpg


I did end up deciding to go driver side drop and I am now on a mission to find a front
axle. I know what I'm looking for now and I just have to find it. I decided to go DS drop
after making a cardboard and then a plywood template. I started off with cardboard and
I bolted a yoke up to it and the card board was to weak to hold the metal yoke. But the
cardboard cut out gave me an ideal of what 9.5" center on center(front input shaft to
front output shaft/yoke) transfer case would be. So then I went on to AA's website and
got all the dimensions I need to make myself a plywood template that I could bolt up to
the transmission and bolt on the front yoke and front driveshaft. And after that why fit it
driver side drop transfer case here I come.

pic's of atlas, dana 300, cardboard cutout 9.5" centers, and my plywood atlas template.
DSC01188-1.jpg


And here is the atlas II up in the cj8

rear view in the jeep:

DSC01190-1.jpg


front view in the jeep:

DSC01192-1.jpg
 
Last edited:
Look at all that space! :thumbsup:

Dig the plywood template!

I know. I think I can fit a football size driveshaft now. And thanks I had to make
sure I couldn't go passenger side drop. And before I spent the money on a Atlas
transfercase I wanted to make sure it was going to work. because I thought that
the extra inch of clearance the atlas gives you would clear the pan on the passengerside. So I made the
template and found out I was wrong. I would have been throwing money at the problem.
And I can't afford to be throwing that kind of money around! If I were to outboard my spings
to fit a larger axle it would have worked but it still would have been close. That gm 4l60e
was just designed to have a driverside drop transfer case behind it.So now I'm going driverside drop and I
have to find a front axle and make a skid plate. but I know it will be functional and right! I could have done
a few other things like ds drop np205(but it has a bad 4l ratio), np241(but I did not want a chain driven transfer case),
flipped dana 300 ( I think it just looks weird), or stak dana 300 housing (but after you buy the housing and 4:1 you could have bought
a atlas done. And the stak replacement housing you would have to have to disassemble the old housing and reassemble the new).
So the atlas was the answer for me. finally onto the next stage of this build. LOL

7jeeps7kings
 
Last edited:
O and how can I forget. I removed my 3" body lift off my cj7, added a new ss dash, big daddy off road rock sliders,
Mopar rubicon 4.5" tj fender flares, and a custom roll cage from "shop teach" on www.jeepsunlimted.com.
check it out: :cheers:

DSC01179-1.jpg
 
Last edited:
Good looking stuff going on here. I love the yellow '7.
 
jeeps, jeeps, and more jeeps

Well It has been nothing but jeeps, jeeps, and more jeeps.
I finally have had time to post updates. I did end up finding a
set of axles. I bought a 1979 ford f250 driver side drop Hp dana 44
front axle and a ford 9" rear axle. I was able to get everything I
need from one spot(chevyeater on ebay). It was great. My plan
is to have the Hp dana 44 cut down to match the ford 9" axle I got
out of an early 70's bronco. So 58-59" wms-wms. I am also
planning on stayingwith the jeep 5x5.5" bolt pattern. I am keeping
the front/rear axlewith open carriers and 4.10 gears. High steer in
the front and disc brakes in the rear. I have degreased and
sandblasted and primer almost everything

Before:
DSC01211-1.jpg


DSC01210-1.jpg


DSC01212-1.jpg


After:
DSC01231-1.jpg


DSC01230-1.jpg


My next step is to get m.o.r.e. spring perches. so I can move
the front axle foward 1". And I'm thinking about get the dynatrac
u-bolt flip kit also(again). get the axles cut, setup, rebuilt. It sucks
because I thought I had this part done. but because of the 4l60e
clearance issue with the dana 300. I had to go driver side drop.
So if anyone is looking for a good dana 300 and a set of 1986 cj7
wide track axles (dana 30/ dana 44) with 3.31 gear ratio's that have
been beefed up with aftermarket parts and are pretty much bolt in ready
let me know. I'm selling them!
7jeeps7kings
 
Last edited:
jeep rims, jeep wheels, and jeep rims and wheels

In the middle of all this I have been buy and selling wheels.
but not my choice. i found a set of rollers 33x9.5x15 bfg mt's
that I couldn't pass. So I bought them. But then I found what I
was really looking for and that was a set of 35x12.5x15 bfg mt's.
And the wife and I looked at rims for a week or two and finally found
a set she liked. I was really looking for a set of the mickey thompson
challeger wheels(slotted mags) 15x10". but couldn't find any but then
my wife was looking through my peterson 4x4 and found the procomp
1031's!

33x9.5x15" bfg mt's (old style) with craiger 15x8" wheels
DSC01216-1.jpg


I removed the 33x 9.5x15" bfg mt's and put them on a set of 15x8.5 slotted mags I had.
DSC01217-1.jpg


DSC01215-1.jpg


And then on the cj8(the garage is a zoo this year!)
DSC01214-1.jpg


DSC01213-1.jpg


And then the 35x12.5x15 bfg mt's (km) oon the pro comp 1031(15x8)
DSC01134-1.jpg


DSC01226-1.jpg


And then on the jeep
DSC01229-1.jpg


DSC01228-1.jpg


wheels and rims done! it was a little early to get them but it was a deal I could not pass!

7jeeps7kings
 
Have you looked into flipping the 300?

300 flip

Yes. I really didn't care for how it looked(IMO). I also looked at the staks case and there were some clearance issues with: driveshaft size, using a HP front axle, and shifter clearance and problems. But I have already jump in with two feet and bought an atlas II transfercase. I was not planning on spending this kind of extra money on the drivetrain. This detour of clearance, function, and look has taken me way out of my drivetrain budget for this build! But in the end it will be what I want! I think somewhere around post#75 I start my rant!LOL
Thanks,
7jeeps7kings
 
Last edited:
You're trying to keep up with me on wheel and tire trading, I see...:D

I like your final wheel choice. Looks great! :thumbsup:
 
You're trying to keep up with me on wheel and tire trading, I see...:D

I like your final wheel choice. Looks great! :thumbsup:

LOL! I need to get a tire machine! I can't take any credit for the procomp wheels.
The wife picked them out!
7jeeps7kings
 
LOL! I need to get a tire machine! I can't take any credit for the procomp wheels.
The wife picked them out!
7jeeps7kings

Amen, Brother! In the last 2 weeks between the Waggy and the Cherokee, and a spare set, I have mounted/dismounted 16 tires! Luckily I can use the machine at work.
 
Amen, Brother! In the last 2 weeks between the Waggy and the Cherokee, and a spare set, I have mounted/dismounted 16 tires! Luckily I can use the machine at work.

Still waiting for a good friend or my work to buy one!LOL
 
well heres some updated pic's:
not much new news. just time and money at this point!
I actually got it unburied for some pic's lol.

DSC01235-1.jpg


DSC01234-1.jpg


DSC01233-1.jpg
 
Last edited:
Not to split hairs, but the data plate on my diffs (82 Scrambler) are stamped 2.72 and 49-18. It originally had the 258 engine and auto transmission. I've counted the actual teeth and they are 49 & 18. If you do the math that's 2.722222...... I keep seeing the highest ratio utilized in Scramblers as 2.73. Just wondering why?
Brant Carter
 
will it be able to get into the garage once the rollbar and tops are on?

Well I hope so! LOL. because that would make two jeeps that don't fit in the garage.
No this jeep should have no problems fitting in the garage with the the top and windshield on/up . the pic's make it look bigger then it really is.
thanks,
7jeeps7kings
 
good deal. looks good. i like those tires and wheels on it.

a lot of these build up threads are giving me an idea of what i should expect and what i want.
 
Back
Top