• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

In need of a Scrambler roll bar with the seat belt attachments

05unlimited

Legacy Registered User
City
Lancaster
State
CA
I am upgrading my '81 scrambler to a 3 point seat belt and need an'83-85 CJ-8 roll bar that has the factory seat belt attachments on the bar. I have cash for a decent roll bar. Some knuckle head in Northridge, CA who had one listed on craigslist decided (after I drove 40 miles to his house, 80 miles round trip) that he didn't want to sell the roll bar. I can modify mine, but I would prefer to use a later model bar. Attached are some pictures of my '81 (for those of you who crave Scrambler pictures).
 
Hopefully you smacked that knucklehead around with a 3 day old carp!!!!! :evil:
I would vote to modify yours. I think it would be easier in the long run. :twocents:
Nice little trailer too! :cheers:
 
I've got a free one in Central Oregon....

Nice Scrambler!
 
CJ8 Roll bar

I wish you were closer. Shipping to the 93536 zip code would probably be too expensive. My brother and his family do pass through Oregon when they visit his wife's family, Hmmmm....
 
i also have a 83 roll bar in pa for sale for $125, again shipping would more then likely be outrageous
 
I wish you were closer. Shipping to the 93536 zip code would probably be too expensive. My brother and his family do pass through Oregon when they visit his wife's family, Hmmmm....
Have them stop by!
 
Before and After

I forgot to add some before pictures of the Scrambler (and my previous YJ and TJ). I picked this rust and damage free beauty up about a year ago after I sold my '05 Rubicon Unlimited. Found it about 2 miles from my house in the High desert here in Southern California. The previous owner said it had failed the annual smog test, so after replacing several things (and still not passing) he parked it for Four years. The Scrambler is now my daily driver.
The re-design of the Jeep Wrangler has turned me off to "new" jeeps (what is a mini-van engine doing in a Jeep?) and I've always loved the classic look of the CJ 7 (and 8). This is my third Jeep (and probably not my last) and none of them have ever let me down.
 

Attachments

  • P1014803.JPG
    P1014803.JPG
    105.3 KB · Views: 35
Last edited:
Ii have decided to modify the existing '81 roll bar to accomodate the shoulder harness attachment. I will post pictures of the mod. when I get to it.

P.S.
Since I have decided to modify my existion '81 roll bar to work with a 3-point seat belt configuration I will be documenting the modification. I have re-installed the 1/2 cab and bulk head and purchased (through McMaster Carr) 1" dia. 2" long shoulder bolts with 3/4-10 threads, along with matching 3/4-10 shoulder bolts that will be welded (nut side in) into the roll bar at the factory height. I am building an adjustable tool that will slide between the cab and roll bar to mark the drill spots for the cab and roll bar. As I start to work on the mod I will post a series of pictures detailing the modification. I will try detail the installation as much as possible with vendors and part numbers along with any mods I mahe to the parts. When finished, this should look very close to stock. Check back.
 
Last edited:
Back
Top