trust
PITA
- City
- White Rock
- State
- NM
In March I swapped on a 4.0 head and mopar EFI, everything seemed fine, drove it to jeep safari and home and did have very slight vapor lock type problem coming home. I rerouted the fuel lines per the instructions and havent had an issue since other than on again off again pinging on regular gas although I also havent taken it more that 10 or 15 miles from home either.
I left last night on a much anticipated Big Adventure with two long time 4 wheeling buddies, we have done a week long BA for several years now and they are one of the highlights of the year. We missed last year because one of the guys was working overseas so this was also a homecoming/reunion of sorts. You can tell where this is going....
Left last night with a full tank of premium (to address any pinging issues), all my camping gear, ARB Fridge, etc. Actually well packed and stowed. The pinging was persistent although off and on and mostly related to incline, up hill ping, down hill not. This is the flat part of the trip. Temp about 1/3 up the gauge, tranny temp about 120, everything in the green. About 730 pm, after 48.3 miles by GPS it starts to cough and sputter and quits. Pull to the side, get out and start looking, fuel line to the rail is cool to the touch, fuel line at the junction between new and old is cool, pressure regulator is warm but comfortable to touch as is the fuel pump.
15-20 min and it's running fine, 6 miles and sputter then die.... again everything is cool, I dont hear fuel boiling like I have in carbed engines. 20 minutes and when I go to start I notice temp gauge is now 3/4 scale but it fires up, temp comes back down to 1/3 and off I go, about a mile and sputter. Long story short it's now 830 or so and i abort and after a rest i turn around and head home. makes about 55 of the 60 miles home without issue and going up the last significant hill (actually, the only really noticable hill in the whole 120 mile failure) it really struggles, sputters and dies. Finally restarts, limps up the hill and runs back into town and parks at the house...
So, two things, 1) why does it continue to ping? I have changed out the plugs, actually already had and didnt realize it, to the cooler, guaranteed not to ping spark plugs and am running premium 91 octane fuel. Timing is computer controlled and I cannot manually retard it. 2) why is it vapor locking, or is it? I did check all clamps/connections and the system is tight, no air leak to cavitate the pump. I did not have my fuel pressure gauge with me, I loaned it out and havent seen it but will this weekend although who knows if i can duplicate the problem or not. I do have a spare pump and probably should have changed it and the filter but didnt. I find that hard to accept though as this POS has been my daily driver for 4 months or so without issue and a weak pump would have been an issue when it was 110* here, not 50* wouldnt it? Could the 4.0 head be cracked? The power and mileage from this swap have been, to say the least, underwhelming. I would swap the stock head and carb back on but I sold all those parts last Friday since the swap seemed to be at least working if not spectacular
Thoughts, suggestions? I will be spending time with the MOPAR people at SEMA next week (assuming the cummins doesnt fail on me too) but I expect that to be fruitless. My current 'plan' is to just sell it and move on to something less disappointing as a hobby. After 37 yearss + of jeeping I think I'm done with the damn things but I hate to move this thing in it's current condition. 24 hours ago I would have told prospective buyers they could drive it anywhere, now I wouldnt sell it unless the buyer brought a trailer
I left last night on a much anticipated Big Adventure with two long time 4 wheeling buddies, we have done a week long BA for several years now and they are one of the highlights of the year. We missed last year because one of the guys was working overseas so this was also a homecoming/reunion of sorts. You can tell where this is going....
Left last night with a full tank of premium (to address any pinging issues), all my camping gear, ARB Fridge, etc. Actually well packed and stowed. The pinging was persistent although off and on and mostly related to incline, up hill ping, down hill not. This is the flat part of the trip. Temp about 1/3 up the gauge, tranny temp about 120, everything in the green. About 730 pm, after 48.3 miles by GPS it starts to cough and sputter and quits. Pull to the side, get out and start looking, fuel line to the rail is cool to the touch, fuel line at the junction between new and old is cool, pressure regulator is warm but comfortable to touch as is the fuel pump.
15-20 min and it's running fine, 6 miles and sputter then die.... again everything is cool, I dont hear fuel boiling like I have in carbed engines. 20 minutes and when I go to start I notice temp gauge is now 3/4 scale but it fires up, temp comes back down to 1/3 and off I go, about a mile and sputter. Long story short it's now 830 or so and i abort and after a rest i turn around and head home. makes about 55 of the 60 miles home without issue and going up the last significant hill (actually, the only really noticable hill in the whole 120 mile failure) it really struggles, sputters and dies. Finally restarts, limps up the hill and runs back into town and parks at the house...
So, two things, 1) why does it continue to ping? I have changed out the plugs, actually already had and didnt realize it, to the cooler, guaranteed not to ping spark plugs and am running premium 91 octane fuel. Timing is computer controlled and I cannot manually retard it. 2) why is it vapor locking, or is it? I did check all clamps/connections and the system is tight, no air leak to cavitate the pump. I did not have my fuel pressure gauge with me, I loaned it out and havent seen it but will this weekend although who knows if i can duplicate the problem or not. I do have a spare pump and probably should have changed it and the filter but didnt. I find that hard to accept though as this POS has been my daily driver for 4 months or so without issue and a weak pump would have been an issue when it was 110* here, not 50* wouldnt it? Could the 4.0 head be cracked? The power and mileage from this swap have been, to say the least, underwhelming. I would swap the stock head and carb back on but I sold all those parts last Friday since the swap seemed to be at least working if not spectacular
Thoughts, suggestions? I will be spending time with the MOPAR people at SEMA next week (assuming the cummins doesnt fail on me too) but I expect that to be fruitless. My current 'plan' is to just sell it and move on to something less disappointing as a hobby. After 37 yearss + of jeeping I think I'm done with the damn things but I hate to move this thing in it's current condition. 24 hours ago I would have told prospective buyers they could drive it anywhere, now I wouldnt sell it unless the buyer brought a trailer


It sputtered once, i knew it was about empty, so I slowed down some. Got in the right lane, slowed down to 55, kept driving smooth. It died, did not try to restart it, coasted on the blowout lane. Dumped 5 gallons in it, fired right back up. Drove it 1/8 of a mile to a gas station, took 7 gallons to fill it up. That's how I know the advertised 15 gallon tanks only hold 12 gallons. Anyway, my cap did not hiss when I removed it, so I am assuming my vent system is working correctly. I also ran a new metal vent line from the rear of the jeep to the under hood canister. Maybe double check how you ran your lines off of the charcoal canister, if I remember the instructions were not too clear on this part

MPG at interstate speeds had been 16 mpg, which I think is good for 35" tires, 4.10 gears, no overdrive. A few people have been trying to get me to put a 4.0 head on my 258, but I am so happy with its performance I don't want to risk screwing it up. IMO, I don't see how a 4.0 head could improve what I already have, or if it would it would be such a minuscule gain it would not be worth the trouble/expense