• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My De-Rustification Project

Radio issue sounds like a headunit issue to me. I would just run a different power wire to the unit and see what happens.

Sent from my SM-J320P
 
Radio issue sounds like a headunit issue to me. I would just run a different power wire to the unit and see what happens.

Sent from my SM-J320P

Confirmed that it is a problem with the headunit. When I was coming in to work today, it cut out again. I had my test light and confirmed that the power wire was indeed sending juice to the radio. I guess I get to go shopping for a new headunit. I am looking for one with bluetooth for phone and media. Other than that I don't care. I found a pioneer on amazon last night. Without the cd player, they are small and light. I like that.
 
This is the system I used because of the limited space I had using the Vintage Air HVAC system
http://www.classiccarstereos.com/product/Secretaudio-SST/SST-System.html

That does look like e nice unit. Probably too nice for my rig. I have my current radio mounted in my center console. And I really like it there where my hand can reach it easily. Seeing it while watching the road is another story but since I mainly listen to my phone (which is mounted up at windshield height) I only need to mess with the volume. So that is good.

That hidden radio would have been perfect for what I wanted to do in my GTO before ai sold it because I wanted to keep the original unit in the dash.
 
Did I mention that I tested the heater blower motor yesterday? Touched a ground wire to the housing and it turned on. No surprise. So I will run a dedicated ground to one of the bolts inside the cab. Thanks for the suggestion. Not sure why I forget about the grounds. I have so many grounding issues that should ALWAYS be the first thing to my mind.
 
Did I mention that I tested the heater blower motor yesterday? Touched a ground wire to the housing and it turned on. No surprise. So I will run a dedicated ground to one of the bolts inside the cab. Thanks for the suggestion. Not sure why I forget about the grounds. I have so many grounding issues that should ALWAYS be the first thing to my mind.

So you have confirmed that you have a GOOD (not intermittent) ground to the radio?
 
Did I mention that I tested the heater blower motor yesterday? Touched a ground wire to the housing and it turned on. No surprise. So I will run a dedicated ground to one of the bolts inside the cab. Thanks for the suggestion. Not sure why I forget about the grounds. I have so many grounding issues that should ALWAYS be the first thing to my mind.

No problem. With jeeps and electrical problems you can say "ground?" And be right 50% of the time. With a glass body it goes up to 90% :)


 
So you have confirmed that you have a GOOD (not intermittent) ground to the radio?

Yep. With the radio not working, there was power still going to it as confirmed by my test light.
 
Yep. With the radio not working, there was power still going to it as confirmed by my test light.

Okay :thumbsup:

I had seen where you posted earlier you used a test light, it just wasn't clear where you were picking up the ground.
We all know how problematic grounds can be on 30+ year old CJ's and as stated fiberglass tubs increase the probability of issues.
The fact that you recently swapped your tub to the new frame leaves open the possibilities of loose or missing connections.

Anyway, at least you have them worked out and can drive it and enjoy it (and the normal Jeep owner issues like the rest of us :rolleyes:).
 
Yep. I was finding good grounds. This afternoon I drove it about an hour away to help someone replace their heater core and blower motor in their 7. That took a lot longer than planned. Mainly due to enlarging the hole in the firewall. Oi. But anyway, I had no issues all the way there and then back home. Other than the radio cutting out.
 
Installed the jerry can holder with the jerry can tool box in the bed.

Also used the compressor and impact gun to get the yoke off of the axle in the back yard. Now to get the yoke off of the front axle under the Jeep. That one is fighting me so letting it soak more.
 
Last edited:
Woot! The pb blaster finally worked. Swapped the yoked and got the front driveshaft installed. I should have 4wd now. Yay.

1ed822ae40a5791bd97a0529b4fdc4f0-1.jpg
 
So today I have installed my external cb speaker and added latches to hold my hard top to the windshield and bulkhead. Tired of the screws stripping out of the fiberglass.
bbede510616afe12a5b6c2f917b017df-1.jpg


a0b1e85d679c4447ed156b09af45cb57-1.jpg


9c222bd1192c710080d45d1e5f0a9255-1.jpg


2e86906277586797f45ef6b5fc81cffd-1.jpg


18c78e072348d76ebdc550e2f6d233f5-1.jpg
 
Thanks. Next big thing is the one piece axle swap for the rear. Tomorrow though I need to get under the front and see about moving the steering stabilizer. I think it is hitting the diff cover.
 
So today I had the one piece axles installed. I feel like I should have attempted to do this myself but I doubted my abilities for this job and I would not have had it done as fast as the shop did today. And the bonus? When I drove it away, my break pedal was no longer weak. It felt better than it has since I finished the swap. I think better than it ever has been, but maybe the same. Just feels really confidence inspiring. I am going to try a panic stop to lock them up.

Would this be related to the one piece axles, or did the shop realize they were weak and do something to help me out? A guy in my local club did the work. I shot him an email asking but he has not responded yet. I will ask him this weekend to get an answer.

Anyway, I am enjoying driving it in this great weather. Looking forward to showing it off at the club Show & Shine this Saturday and then on a trail ride the following week. It will be the Scrambler's inaugural off road excursion. Woot!
 
Just got a reply email from Joey. He said that he did some minor adjustments to the right rear brake shoes then rebled both rears. Amazing difference.
 
I was going to say I bet he bled the rear brakes...
 
Back
Top