- City
- charlotte
- State
- nc
I am getting close to pulling the trigger on a lift and gearing change. I have been researching this, reading all the threads I can find, and would welcome any opinions/ advice. I know enough to be dangerous about this stuff. The reality is I will be having a Jeep Mechanic do this work for me, so I am trying to educate myself as much as possible before moving forward.
My Scrambler: '85, 258, T-176 4 speed, basically stock other than recent "team rush" upgrade and planning a carb udgrade / emissions simplification in the near future. This is not my DD. It stays in the garage and I drive it when I feel like it- mostly around town. I am not planning heavy off road use- maybe a trip or two to the moutains/ some mild trails and on the beach during our annual NC OBX trip. Highway driving is only occasional, but I do want to be able to take the above mentioned trips (2-4hrs) at a comfortable pace.
Here's what I am thinking:
Tires: I'd like to run BFG K02's 33x10.5 on my stock 15x7 wagon wheels
Lift: BDS 2.5". My last jeep was a yj that I put a BDS lift on and was very happy. I've heard/ read some good supporting commentary about BDS lifts on CJ's so figured it seems like a good option.
Shackles: Consensus seems to be that I should replace the shackles, but I am not clear on what shackles would be a good choice. I've see the Currie greasable shackles get good reviews, but really not sure. I am not looking to gain excessive lift.
Gears: I have 2.73 gears. These seem too tall IMO, even on the street with the skinny bobo street tires that were mounted when I bought the Jeep. So I am thinking for my use, tire size, 4 speed, etc. a 3.73 would probably be a good fit. Haven't ruled out a 4:10.
In talking with my mechanic, I have realized the, gearing, axles, etc. isn't a small expense due to the case break and need for a new carrier. And while all this is being done, i might as well do solid axles...
Any opinions on the above would be much appreciated- especially from anyone who is running a similar setup either 3.73 with 33's
My Scrambler: '85, 258, T-176 4 speed, basically stock other than recent "team rush" upgrade and planning a carb udgrade / emissions simplification in the near future. This is not my DD. It stays in the garage and I drive it when I feel like it- mostly around town. I am not planning heavy off road use- maybe a trip or two to the moutains/ some mild trails and on the beach during our annual NC OBX trip. Highway driving is only occasional, but I do want to be able to take the above mentioned trips (2-4hrs) at a comfortable pace.
Here's what I am thinking:
Tires: I'd like to run BFG K02's 33x10.5 on my stock 15x7 wagon wheels
Lift: BDS 2.5". My last jeep was a yj that I put a BDS lift on and was very happy. I've heard/ read some good supporting commentary about BDS lifts on CJ's so figured it seems like a good option.
Shackles: Consensus seems to be that I should replace the shackles, but I am not clear on what shackles would be a good choice. I've see the Currie greasable shackles get good reviews, but really not sure. I am not looking to gain excessive lift.
Gears: I have 2.73 gears. These seem too tall IMO, even on the street with the skinny bobo street tires that were mounted when I bought the Jeep. So I am thinking for my use, tire size, 4 speed, etc. a 3.73 would probably be a good fit. Haven't ruled out a 4:10.
In talking with my mechanic, I have realized the, gearing, axles, etc. isn't a small expense due to the case break and need for a new carrier. And while all this is being done, i might as well do solid axles...
Any opinions on the above would be much appreciated- especially from anyone who is running a similar setup either 3.73 with 33's

After one 7 hour highway trip, I purchased the AX15 to replace the T5's I kept blowing up 