• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Not technically a Jeep, but darn close

I had heard of them. Looked like they used to be licensed through Willy's
 
They are an Indian company not China.
 
https://jalopnik.com/the-mahindra-roxor-is-a-tiny-offroad-jeep-to-conquer-am-1823460351

I copied this from jalopnik. I'm not gonna lie, I think they are kinda neat.

The Mahindra Roxor Is A Tiny Offroad Jeep That You Can Totally Buy In America

David Tracy
Yesterday 11:23amFiled to: MAHINDA ROXOR

Indian automaker Mahindra just unveiled a new off-road vehicle called the Roxor, and it not only looks like an original Willys Jeep, but it’s also got the hardware (and the history) to back it up. Better yet: it’s for sale in America and it was built right here in Detroit.

Unlike many other side-by-sides, the Roxor will feature a very CJ-7-ish steel body mounted on a steel frame. And like an old-school Willys Jeep, bolted to the frame will be two sets of leaf springs holding up two solid axles (3.73 ratio; lockers will be available later, according to company reps).

The powertrain will be the ultimate off-roader’s dream: a turbo-diesel (a four-cylinder) mounted to a five-speed manual (an automatic option will also be available) mounted to a low-range transfer case. Admittedly, that 2.5-liter diesel that has to carry around 3,035 pounds of curb weight isn’t the strongest at 62 HP at 3,200 RPM and 144 lb-ft at 1,400 rpm.

Mahindra has quite a history of building Jeep-like vehicles, with their very first offering being the forefather of the current Thar (on which the Roxor is based); that first car was essentially a Willys CJ-2A Jeep shipped to India as a knock-down kit and assembled under license back in the late 1940s. It’s these “grandfathered” licenses that allow the company to build such Jeep-like vehicles.

And my god, is the Roxor Jeep-like. The rounded fenders are pure CJ-7, as is the door opening with a filleted corner and a sharp 90-degree cut rearward to the top of the rear tub. The shape of the hood, the hood latches, the outline of the grille—it’s all extremely CJ-7-ish. The rear is a bit different, though, with different lights and a fuel filler on the side instead of under the taillamp.

The wheelbase is about three inches longer than a CJ-7, overall width is narrower, height is about eight inches taller, but length is almost exactly the same.


Unlike the Thar whose bones it shares, the Roxor will not be built in India. It’s being manufactured in metro Detroit, where the vehicle was designed and engineered.


There’s no mention of when the side-by-side will hit the market, with the press release simply stating that there’s a National Dealer Meeting scheduled later this month to “discuss the roll-out,” and that the target is to have 300 “[first] wave” dealers.


According to chairman Anand Mahindra, the new Roxor will come with an absurd 900 color options.

Towing capacity is about 3,490 pounds, and rear payload capacity is only 349 pounds. Maximum speed is limited to 45 MPH—that’s a similar top speed to that of an old Willys CJ-2A. Fuel economy, Mahindra claims, is somewhere around 32 MPG based on company testing.

Starting prices for the two trim levels, according to company representatives, will range from $15,549 to $18,999. I can’t wait to get my hands on one.

AUTHOR

David Tracy
Writer, Jalopnik

ROXOR 1.jpg
 
Mahindra has a longer relationship with the Jeep brand than FCA by decades and has been a licensee forever.

This is a licensed vehicle being built for the US market specifically in a new factory in Detroit and they will have a network of US dealers.

Supposedly D44s along with the leaf springs, narrower but longer than a CJ-5. It's a side-by-side and the issue will be street legality. In locations where side-by-sides can be driven on the road, you're in the money.

I am getting a lot of attention with a post on these on Facebook for JPFreek and there's a lot of people who want to compare them to either an actual Jeep (buy a Willys and put a 4BT in it for less money!) or a RZR which I maintain is like comparing a Mustang to a Wrangler. For the right person, I think these look great and the idea of a brand-new vehicle with a warranty is going to appeal to a lot of folks who can manage to make use of them.

Just the simple fact that they came up with the idea and saw it through to bring to market wins a lot of points in my book :shrug:
 

Attachments

  • HomepageRotate4.jpg
    HomepageRotate4.jpg
    26.8 KB · Views: 111
  • HomepageRotate9.jpg
    HomepageRotate9.jpg
    25.1 KB · Views: 111
Sure, but Gucci knockoffs are typically made in China which is where the analogy was coming from.

Not a "knockoff" and not a valid comparison. This is 100% legitimate and above-board with Jeep.
 
So, who is the licence from in this case, Jeep? Willys?

I didn't think Willys existed anymore...
 
They got the license from willys back in 1947 to build the Jeep, just not with the Jeep name. So legally they can still build them.
 
A passenger drop front D44! Wonder how wide they are?
 
We had some Mahindras in the UK, there probably still is if they haven't all rusted away!.
I believe the axles were D44s front and rear but they had 19 spline shafts and were very narrow things indeed!.
 
I think these things are really cool. Very excited to see how people like them. I have a 53 CJ3a sitting in the barn. Rather than restore (and run on) 65 year old running gear, it would be cool to graft the 3A front clip and windshield on this. HP figures are close, but this diesel has much more torque than the factory L or F head I4. The only thing I haven't seen yet was power steering/brakes. Discs up front would be huge over the factory drums.
 
Back
Top