Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
To bleed the brakes you need to disable the proportioning valve slide by holding the “button” depressed at the front. If you don’t do this, the valve thinks there is a problem and will shut off flow to the ‘leaking’ line.
Very nice.
Interesting that it is left hand drive and also has the UK spec mirror. I don’t think I have seen that style of mirror on anything but right hand drive versions.
The side facing seats were called Troop Seating.
Some had roll bars, others did not.
For the Overlander some had CJ-8 diameter bars and others were CJ-7 diameter. Mine is a CJ-7 diameter. They really were odd one offs. Which is why I like them so much.
Striped seats are the indicator it is Laredo. The best you can do is look at the firewall tag under the hood to see if those seats are original.
The wagon version was only offered outside the USA. It is known as a world cab and was available on -7 and -8 models. Very common in South America.
Push a corner down and release. If it goes up-down-up-down-up, you need new shocks. If it goes up and stabilizes, they are fine. In between is a judgment call on if they are bad.
https://www.cj-8.com/threads/cj-8-fuel-filler-for-20-gallon-tank.52161/
Here is a post showing the 2 different filler neck styles. The part numbers are for the 20 gallon tanks.
I don’t think either are terribly rare.
I assume the pan gasket is silicone, if so that material is used for baking sheets in ovens.
I think it would be good to over 800 degrees F. But YMMV. I would hope the exhaust is not cooking the pan anywhere near that, and if so a heat shield might be in order.
Overlander are all that way. Front bumper on the rear with ‘82 CJ-7 limited rubber end caps.
If anyone has a lead on those end caps, I am in need of a set.
More than likely the plastic bushings in the linkage. There are 3 or so spots where a rod fits into a plastic bushing that attaches to another rod. These can wear out or be missing developing slop.
With what it is $12k is not terribly off the mark.
Regarding CB, while I think they are all sales pitch, they do help in their own way. Heck, I have bought some better quality used and NOS parts from them.
I know some people that have them service their jeeps, and they are happy.
Like...
I have the 67 design mount in my JL, the best thing I have done to the vehicle so far. Love having my phone on the dash and charging via the mag mount.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.