• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. bigwalton

    Exhaust Muffler Question

    I knew that the exhaust was getting redone and I was hoping it would be sooner than later (stroker install), so just couldn't pull the trigger on doing more than bolting on mufflers, especially not trusting my ability to weld it back together if I started cutting it. In retrospect I should have...
  2. bigwalton

    2006 LJ “Highline” Build History

    What are the mount points for the spare carrier? Link?
  3. bigwalton

    Exhaust Muffler Question

    I got rid of the cat that I put in when I did the 4.0 swap a number of years back and I had serious droning issues with my exhaust afterward. I tried at least 6 different mufflers trying to fix it and none worked (what you show wasn't one of them). I think there was just too much straight pipe...
  4. bigwalton

    2006 LJ “Highline” Build History

    The AEV Highline kit still holds maybe one of the top 5 spots for me as the best aftermarket mods for a Jeep ever. That setup looks so RIGHT! When we bought our LJ, it only had the hard top. Told the dealer (tiny town in SE NC, Whiteville) that we really wanted the dual top option. Dealer owner...
  5. bigwalton

    Hand held remote fuel transfer pump

    This. The only complaint with it is he diameter of the hose, you have to have room for it to fit in with the ball fitting thing at the bottom.
  6. bigwalton

    Drag link and Tie rod alternatives for a RHD

    Hope it gets sorted. Order (at least) another pair of the TREs if not another whole setup once you know they work. Never know when they'll quit making something.
  7. bigwalton

    Drag link and Tie rod alternatives for a RHD

    I’d never go through that on a D30 personally. Looks like the tie rod threads into both TREs, so if you flip the whole thing the thread direction changing is irrelevant. As long as it flips on both ends, right? If that drag link hole is tapered both ways, then I think he’s onto something.
  8. bigwalton

    Drag link and Tie rod alternatives for a RHD

    This would be where I would go for a stock upgrade that would work.
  9. bigwalton

    Drag link and Tie rod alternatives for a RHD

    I find it hard to beliieve that the taper in the TRE hole is going both ways... that would result in a much weaker connection to my thinking, half the shank would be sitting in there unsupported? This is the kind of situation where I think putting that end on the other side for RHD is likely...
  10. bigwalton

    Drag link and Tie rod alternatives for a RHD

    Didn't see this, work's been insane. Posting without reading everything above in detail, likely repetitive. The key is that the RHD setup differs entirely from stock CJ stuff because the drag link comes to the tie rod instead of the knuckle. There's a hole in the TRE as pictured above...
  11. bigwalton

    Starting on a journey

    Awesome. Sorry for the troubles and I know exactly how hot you must have been. The world can is an oven. Ugh. Grapevine is a haul for sure. Congrats on a spectacular adventure!
  12. bigwalton

    RIP Peter/ineedajeep

    If you ever had the chance to meet Peter Vera/@ineedajeep you made a friend. He was one of the nicest people I’ve ever met and was just a ray of sunshine, always smiling and laughing. I loved getting to see him at Nationals and we started a tradition of alternating which of us would bring a nice...
  13. bigwalton

    bigwalton's Postal Stroker

    I had the ‘97 4.0 canister in it and hooked up all official on the firewall so I am aware and would rather have that space back. I was ignorantly expecting something very simple and cheap in the aftermarket just as a basic filter.
  14. bigwalton

    bigwalton's Postal Stroker

    Under hood space is going to be at a premium. Don’t want that monster under there.
  15. bigwalton

    bigwalton's Postal Stroker

    That would be the fallback I guess :shrug:
  16. bigwalton

    Genright fuel tank access door (CJ/YJ unit)

    Installed by drilling out and countersinking the four side holes for stainless screws/lockwashers. I don’t like the idea of rivets and I didn’t want any more holes than needed. The frame isn’t going anywhere and doesn’t see any load that the rivets would help with IMO. I grabbed some peel...
  17. bigwalton

    bigwalton's Postal Stroker

    New plan: get tank in, skip finishing the wiring, make a “break in board” (literal piece of OSB) that will have the Terminator X, relays, fuel pump power, etc needed to fire it up, install the ignition/engine harness wiring, attach radiator with prop rods, run fuel lines temporarily. Ignition...
  18. bigwalton

    bigwalton's Postal Stroker

    My wife has taken to asking “so what are you going to get done on the Postal today” in the morning and “what did you get done on the Postal today” in the evening and she’s coming out to sit with me and help as needed. I think she’s tired of hearing me complain that I wasn’t getting anything...
  19. bigwalton

    bigwalton's Postal Stroker

    I saw that when I got the pump and fuel line setup. The total “splurge” Holley laser level sender was $130 (which I got based on reviews I saw specifically with speedhut gauges and a hope for longevity without moving parts), and I couldn’t take the price for that as a simple can with charcoal...
Back
Top