Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Did they give you an explanation as to why?
Craig
The customer service person I talked to actually was in the Toyota Div so he really wasn't familiar with Jeep. He said on Toyota's they are weighted slightly heavier to the driver side with their equipment placement. So on many of their kits...
I called Old Man Emu Company and the customer service person said it was common for them to ship one spring that would have a stiffer rate and that that spring should be mounted on the drivers side. Last night I pulled the rear leaf springs off and sure enough there was a difference. Check out...
So I'm lifted SOA with Old Man Emu 2 1/2". I've got this lean to the left that drives me nuts. I thought I must have gotten weak leaf springs on the left so I was planning on swapping the left side springs with the right to see if that changed anything. I just read the post where a left lean is...
Scott, I just put in Eaton Detroit Electric Lockers, front (44) and rear (60). Just got back from Moab last week and really liked them. Very quiet and instantaneous. Installation seemed pretty clean with just one small hole for the cable which controls the electro magnet. Cheers Kim
Ok that's my question, how the striker pin loosens and adjusts. Slims? This is probably a ridiculously easy process but I've broke 2 of the T20 torx bits just trying to get the cover off of the striker body due to those little rusted and seized screws. Do I even need to get that cover off ? I...
Sorry if my initial statement was illusive. When latched, one of my doors sits out 1/4" from being flush to the body. I'm thinking if there is an adjustment on the striker pin to move it inward it will draw the door in so that its flush to the body. Maybe the pin doesnt even adjust that...
I had the same thing happen after installing the Howell system. The rotating cable into the speedometer had pulled back just a tiny bit so as to not mesh inside even though the cable retaining ring was tight. Undo the cable off the back of the speedometer, pull the rotating cable out about a...
When I bought my jeep the previous owner said it had a 360 engine with a Turbo 350 automatic. I'm sure that's what he was told from the guy he bought it from, and the guy he bought it from, and the guy he bought it from. I had the trans serviced recently and found out it really is a 904 auto...
I just found significant rust on the inside rear frame rails. I hadn't seen it before because the gas tank blocked the view. Are these plates for this area?
Here's some of what I've done to get it to this point. As I said, bought the jeep in Oct. Frames in pretty good shape a little rusty. Body has a lot more rust. But what the Hell, I wanted an old Jeep. I have been looking for a set of used Tracks for 2 years with a 5 on 5 1/2 lug pattern...
Ok, I'm somewhat new to you guys and this forum. Bought this Jeep in Oct. The project is to make it a off road-er and a wintertime jeep cat by adding the Mattracks. My wife and I have a cabin that is accessible by snowmobiles in the winter. I thought this would be a hoot for that and yet fun in...
daddyo, I just went through this in Oct. I found a jeep on Autotrader in Washington state, I'm in Utah. My first suggestion is do most of your communicating by phone. E- mail is good for a lot of things but you really need to get a feel for the integrity of the seller. After a couple of...
Good info Thanks Guys
This will be a Moab wheeler primarily. Moderate to hard stuff. Probably not the extreme or body damage stuff, not at first any way, but who knows?? I got into this sport last year when I was invited to go with a group of well rigged guys to Moab so I rented a Rubicon. 1...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.