• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. TXJEEP

    Steering Box Replacement

    I have a steering box bracket from rusty’s off-road. I accidentally ordered two of them 6 months apart and found the old one after install. PM me if interested, I’ll make you a deal.
  2. TXJEEP

    EV Conversion

    Almost a week later with no response to my request for more information. Oh well. It might be early in the EV lifecycle for good options. Electric GT is interesting but $60k+ is out of the spectrum in my view. What GM is doing with a common platform for any vehicle is potentially the future...
  3. TXJEEP

    EV Conversion

    I just came across this site this morning. I requested more information out of my burning curiosity, but has anyone seen this or investigated this setup? https://erevon.com/
  4. TXJEEP

    Half door identification

    In case your half doors do not have locks, they are early YJ.
  5. TXJEEP

    Southwest Performance Wire Harness

    Assuming the wire is good quality it depends on how you value your time. I could see easily spending an extra 20 hours running, sheathing, terminating, and testing this product over a Painless system. I'm slow, others might breeze through all of that.
  6. TXJEEP

    JW Speaker LED headlight install

    A side note on the plastic capture nuts for the adjusting screws: The top one on the passenger side stripped when removing it. Remove the spring before the adjusting bolts and you might have better luck. I could not locate any type of replacement without buying a complete headlight assembly...
  7. TXJEEP

    JW Speaker LED headlight install

    Here's how it turned out. Have not installed the bezels yet.
  8. TXJEEP

    JW Speaker LED headlight install

    For what it's worth, here are a couple of pictures of the housing. At first I cut too little out and it became a pain to try to trim where needed. I just used a dremel to get the job done.
  9. TXJEEP

    JW Speaker LED headlight install

    That makes sense. I cut down the perimeter and left the "tabs". I had to bend them out a bit to clear the light housing so it stands to reason that the back of the light provides that needed seperation. Thanks for following up.
  10. TXJEEP

    JW Speaker LED headlight install

    @Big Walton, I am starting this modification but I ran into a question. When you cut the headlight bucket and remounted the secondary bucket that accommodates the adjustment screws, how did this work? The 3 "tabs" on the outer bucket touch the inner bucket for adjustment and appear to provide...
  11. TXJEEP

    Gladiator

    I’m not criticizing anyone’s decision. Generally, I like it and was looking forward to the release for a long time. I just can’t get past the taillights. They look like a mistake or an afterthought. I see trying to keep the tradition but something has to compromise. I would suggest narrowed and...
  12. TXJEEP

    Purchased my sisters Scrambler today.

    Congrats and welcome.
  13. TXJEEP

    Been a while since we had a Beer thread...

    Great little West Coast style IPA from Downtown Dallas
  14. TXJEEP

    Flare options

    I bought Metalcloak rear flares but I don't think I am going to use them. I am not suggesting them, just giving options.
  15. TXJEEP

    Weird/Scary steering problem

    Just a thought but when you replaced the steering box and the steering shaft, did you also replace the coupler and the square berrings inside the coupler. If you lost one in the grease or if anything is loose around those attachments, it could cause your issue without having any movement in the...
  16. TXJEEP

    1983 Driver seat fix, passenger tilts forward?

    That’s factory. The idea, I suppose, comes from the CJ-7 with a back seat. Most likely passengers enter from the curb side of the Jeep. You can buy pricey aftermarket brackets that tilt on both sides or you can buy oem brackets from a YJ. For me, I needed the lowering modification so the...
  17. TXJEEP

    Windshield Frame

    Yikes, that would take a lot of fabrication. https://www.jeepglass.com/7686.htm This isn’t cheap but it is quality and better than some of the thin metal replacements.
  18. TXJEEP

    What's on your Work Bench?

    Applied the new lettering and black stainless hood hardware.
  19. TXJEEP

    Where to put the stickers?

    Worked out pretty good. Have a small crease in the “M”. May replace but I will wait and see how it looks in place. Thanks for the help guys.
Back
Top