• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. joshvt

    Radiator Replacement

    I almost bought one. I called them regarding a what appeared to be difference in the outlet size vs. my original. I talked with them about their product in general and they followed up with an email saying the outlet size listed was a typo. Seems to be customer service oriented company, made...
  2. joshvt

    Upgrading Brake Booster

    I have a leaking MC so going to have the booster replaced while I am at it. The Tuff Stuff looks nice- and it's made in the USA. Randyzzz- Is it a direct fit/ plug and play? When you say "kit" did it come with something other than just the MC and booster?
  3. joshvt

    Valve Cover Bolts Won't Stay Tight

    Beautiful jeep weather here in NC today so I found a lot of around town driving to do. Miraculously, the valve cover leak has almost stop. I've still got a trace amount of oil on the cylinder head near the front passenger side screw, but it's waaaaay better than it was. I torqued the bolts...
  4. joshvt

    Valve Cover Bolts Won't Stay Tight

    I recently installed an OMIX aluminum valve cover. I used a felpro gasket instead of the cork one and installed dry (no rtv) per the felpro instructions. I torqued the allen bolts to 55in-lbs working from the center out per the instructions. First drive and the thing leaked. It didn't leak...
  5. joshvt

    MC 2100 -slowly working on install- questions.

    My jeep is an 85 and has the computer. It was basicallly stock (and running like a turd when I started all this). The recent mc2100 installation took the carb out of the computers domain. All the computer is doing now is maybe interfering with the timing/ ignition. I know the nutter is my...
  6. joshvt

    MC 2100 -slowly working on install- questions.

    Does the E-core coil eliminate the need to nutter? Since I have done all of the Team Rush upgrade except the coil, I think I am going to stick with what I have done and replace the coil. If the nutter is still required with the new coil- do the nutter or coil first? or does it matter? Anyone...
  7. joshvt

    MC 2100 -slowly working on install- questions.

    I am going to ask a dumb question- ignition systems have always been hard for me to understand... Based on what I am reading and a quick google search, TFI is the same thing as the "Team Rush Upgrade" (Larger cap, rotor, wires, etc.), correct? I did this upgrade minus the coil (still running...
  8. joshvt

    MC 2100 -slowly working on install- questions.

    I have read from several sources that doing the nutter is helpful even with the computer controlled carb out of the picture. Something about when the carb plug is disconnected the computer puts the ignition into limp mode. If true, limp mode doesn’t feel too bad! I’ll look forward to seeing...
  9. joshvt

    MC 2100 -slowly working on install- questions.

    Finally fired it up today. After some cranking she started right up. Idled a little rough at first. Once it was warmed up, I Used a vacuum gauge and timing light that displays rpm to adjust mixture screws and get it idling smoothly at 650rpm. I have never tuned a card before- this was way...
  10. joshvt

    MC 2100 -slowly working on install- questions.

    I'll preface my comments by saying that I don't have mine up and running yet so my opinion may evolve. Here are some general thoughts: After researching carbs, I decided the 2100 seemed like the best option. I knew going to the pick a part, finding the right carb and rebuilding it wasn't...
  11. joshvt

    MC 2100 -slowly working on install- questions.

    Thanks for confirming my thoughts... Of course I can't find a replacement that is listed as a fit. I want a new one rather than gambling that a 30 year old purge valve will be good. I have found several that appear as though they would fit, but specific dimensions are not provided. Anyone...
  12. joshvt

    MC 2100 -slowly working on install- questions.

    I had a thread going as I slowly work on installing an MC 2100 I purchased from Gronk. Once started I decided to put on an aluminum valve cover and Felpro gasket in an effort to stop the oil leak. I have been cleaning things up as I go and taking my time to learn as I go. Thanks for the help...
  13. joshvt

    NOTICE: Massive CJ-8.com forum hardware failure & data loss - 10/21/17

    I thought something seemed odd last night when the site wouldn’t load. Sucks to lose all that valuable info in one spot, but it still exists. Lessons learned make us stronger.
  14. joshvt

    Lift and Gearing Help/Opinions

    yes, just the cost of the carrier... a few hundred bucks. I've gotta draw the line somewhere, I don't think this will be where.
  15. joshvt

    Lift and Gearing Help/Opinions

    I decided to go with 3.73's since this jeep is going to see mostly street use and I want it to be decent on the highway. I also determined I have a T-177 which has a lower first gear than a T-176 so that will help to get things moving a little better. Last thing I need to decide is whether to...
  16. joshvt

    Lift and Gearing Help/Opinions

    Thanks for all the input on this. I am torn- leaning towards 3.73's since I don't plan on changing the transmission. We shall see- I have been known to change my mind... One other question for those running 33's- will 33's rub the springs at full steering lock? This happened on my wrangler...
  17. joshvt

    Lift and Gearing Help/Opinions

    FLCJ8- that grimmjeeper gear calculator is really cool. Thanks for mentioning. So according to that, with my 4 speed, 3.73's and BFG 33 K02's (which are actually 32.5") I'd be turning 2699rpm's @ 70 mph. 4.10's would require 2967. Even 2699 sounds like a lot! I don't do much highway...
  18. joshvt

    Lift and Gearing Help/Opinions

    I am getting close to pulling the trigger on a lift and gearing change. I have been researching this, reading all the threads I can find, and would welcome any opinions/ advice. I know enough to be dangerous about this stuff. The reality is I will be having a Jeep Mechanic do this work for...
  19. joshvt

    Heater Cable and Seat Questions

    As a follow up to this, Barney did some more research and ended up saying the second one he sent was the best he could offer. I think it fits good enough. I drove the jeep in the rain the other day since my DD was in the shop. After pulling it into the garage I checked and there was a small...
  20. joshvt

    Heater Cable and Seat Questions

    Barney sent the replacement quickly. Unfortunately, it appeared to be very dimensionally similar to the first one. I installed it anyway last weekend. It still projects from the tub like the first one did. That said, it seems to fit a little better. I contacted Barney and sent him pics. He...
Back
Top