I'll preface my comments by saying that I don't have mine up and running yet so my opinion may evolve. Here are some general thoughts:
After researching carbs, I decided the 2100 seemed like the best option. I knew going to the pick a part, finding the right carb and rebuilding it wasn't going to happen if I wanted this done any time soon. I read mixed reviews of Gronk and his carbs and decided to take a chance since I liked the idea of an all in one package that was ready to go. I didn't find another option
Since my Scrambler is not my DD, I have been taking this project slow and researching learning as I go. I can follow instructions, but I tend to like to understand why I am doing something. I have also decided to replace the valve cover, fuel lines and do some general clean up while I have everything apart. I also wanted to clean up the emissions stuff, but wanted to make sure I understood what I was eliminating. With kids, business, and other interests/ commitments I have been working on it when I can for about 2 weeks. I am finally ready to bolt up the carb and turn the key- hoping to find time before the weekend. Someone who was not doing this for the first time and more familiar with carbs and cj's could probably knock this out in a day.
Gronk's instructions are ok at explaining the "why" and are decent at telling you what to do, but definitely leave some gaps. To make things a little more complicated, there were many variations of the mc-2100- I notice subtle differences in many of the pictures I looked at while researching. If you are interested, here are some links that I found most educational and filled in some of the gaps:
Adventures Under The Hood: http://home.sprynet.com/~dale02/ I am sure this link has been posted on other threads. It does a very good job of explaining what everything emissions related does in stock form when the computer is present. It also gives some tips on simple tests to diagnose if certain emissions components are working.
MC2100 Set Up for a 258: http://street2mud.com/webfiles/MC-2100%20set%20up%20for%20a%20258.pdf This gives an extremely detailed explanation and diagrams of the carb itself and then instructions for adapting to a 258.
Motorcraft 2150 2V Carburetor: http://grantorinosport.org/bubbaf250/carb/carb02b.html The top of the page says this is a "Ford V8 Workshop" but this article is about the 2150 and not really specific to the engine. I found it to be another good source if you are interested in the inner-workings of the carb.
As for customer service... Let's just say that as a small business owner, Gronk's response time is not exactly what I would try to emulate. He has responded to my questions, but it usually takes 2-3 days minimum. His responses are typically concise so if you have questions make them very direct. The carb took about 2-3 weeks to get to me, but it did arrive within the date stated on his listing- not sure if he builds these to order or what.
As for the carb itself, it appears in good shape and has the Motorcraft stamp on it (I had read one review accusing him of selling knockoffs). I believe it is genuine. My biggest complaint is that the linkage arm was bent preventing it from reaching WOT. I posted about this a while back and struggled to find a definitive answer about the throttle plate position at WOT (They are supposed to be 90 degrees- mine were not). After confirming this, I bent the linkage and it now operates properly. When I contacted Gronk about this he said "The throttle plate should be good to go"... Not a huge deal but annoying and dents my confidence in him a bit... The other thing I wish I would have asked him was if it is possible to order a carb with a bowl vent. There are many variations of the mc 2100 and not all have the vent. Mine doesn't. Apparently the carb is vented internally when there is no bowl vent. I haven't really figured out how it vents without creating a gas smell, so am a little concerned I may get a gas smell in the garage. Maybe false concern- we will see. When I asked Gronk about this he said "You'll be good". At the end of the day, I don't have a ton of confidence in customer service and I am not sure what would happen if the carb has issues once I get it fired up. Hopefully that won't be the case.
Those are my random thoughts- I hope they help. Let me know if you have other questions.