So my radiator swap thread was a victim of the data losses a few months ago, but I thought I would share what I learned for future reference during my epic battles to not destroy radiators in my Jeep.
1. No large parts house, NAPA, RockAuto, Autozone, name it, carries the correct radiators for Scrambler with heavy duty cooling.
2. Spectrum and the other aftermarket manufacturers of which there are maybe 2-3 make radiators with the core centered in the tanks. This is not like the original which is offset.
3. The replacement fan clutches are also a 1/4" longer than stock.
4. The Omix shroud doesn't really fit properly.
4. This all comes together with a bump and your fan slicing your radiator (or at least it did for me).
What I did to solve this problem:
1. Swap to a 180 F thermostat from a 195 thermostat.
2. Use a POS Spectrum Radiator because that's what I could get.
3. Buy a 1" Flex-a-lite fan spacer.
4. Buy a Crown 4 blade fixed radiator fan blade.
5. Drive around just fine. The Jeep runs much better with the 180F thermostat and doesn't seem like it's going to overheat at all even though it has a smaller 4 blade fan and no shroud.
After destroying a couple radiators and having a "professional" mechanic shim my engine mount on one side to make everything "fit" I had posted on this forum and found several helpful replies that lead me to the solution listed above.
There was also mention of a company called CG&J radiators that makes a supposedly appropriate replacement radiator that would fit the HD cooling fan and fan clutch. It's part JP 3006. Here's the link: http://www.cgj.com/store/product/jp-3006/
There was also mention of a 1981 or earlier non-HD fan clutch being shorter and potentially more representative of the original 82 and later fan clutch.
So, for the purposes of saving some Scrambler owners some future grief, abandon all hope ye who enter here hoping to easily replace your stock HD cooling radiator and fan clutch. A 1" spacer, 4 blade fixed fan, and 180F thermostat are your answers. Or you can go with electric as long as it's not the Flex-A-Lite kit for Jeep CJs. It isn't even close to being able to fit properly. I tried that too. Alternatively, you can destroy a couple radiators figuring this out like me. Hope this helps.
1. No large parts house, NAPA, RockAuto, Autozone, name it, carries the correct radiators for Scrambler with heavy duty cooling.
2. Spectrum and the other aftermarket manufacturers of which there are maybe 2-3 make radiators with the core centered in the tanks. This is not like the original which is offset.
3. The replacement fan clutches are also a 1/4" longer than stock.
4. The Omix shroud doesn't really fit properly.
4. This all comes together with a bump and your fan slicing your radiator (or at least it did for me).
What I did to solve this problem:
1. Swap to a 180 F thermostat from a 195 thermostat.
2. Use a POS Spectrum Radiator because that's what I could get.
3. Buy a 1" Flex-a-lite fan spacer.
4. Buy a Crown 4 blade fixed radiator fan blade.
5. Drive around just fine. The Jeep runs much better with the 180F thermostat and doesn't seem like it's going to overheat at all even though it has a smaller 4 blade fan and no shroud.
After destroying a couple radiators and having a "professional" mechanic shim my engine mount on one side to make everything "fit" I had posted on this forum and found several helpful replies that lead me to the solution listed above.
There was also mention of a company called CG&J radiators that makes a supposedly appropriate replacement radiator that would fit the HD cooling fan and fan clutch. It's part JP 3006. Here's the link: http://www.cgj.com/store/product/jp-3006/
There was also mention of a 1981 or earlier non-HD fan clutch being shorter and potentially more representative of the original 82 and later fan clutch.
So, for the purposes of saving some Scrambler owners some future grief, abandon all hope ye who enter here hoping to easily replace your stock HD cooling radiator and fan clutch. A 1" spacer, 4 blade fixed fan, and 180F thermostat are your answers. Or you can go with electric as long as it's not the Flex-A-Lite kit for Jeep CJs. It isn't even close to being able to fit properly. I tried that too. Alternatively, you can destroy a couple radiators figuring this out like me. Hope this helps.
