Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Saw a photo today indicating Baton Rouge got 8”. That’s nuts. Houston only got about 2”. Luckily I flew out to Vegas on Monday and missed all the fun back home, and barely got on the last flight before they closed the airports.
As I recall, it is just the trans module which is slightly larger than a deck of cards. I think they were mounted under the dash on the passenger side of XJs. I pulled my controller out of a wrecking yard years ago.
I would be interested in that info. I have an AW4 in the barn that I was considering using in the Overlander. I have an AW4 Jeep controller for it, but have just put it off as rebuilding the original transmission was easier.
Sorry for not seeing this sooner.
I had 4 options from Precision.
Lockup LS
Lockup HS
Non-Lockup LS
Non-Lockup HS
The lockup vs non is determined by the input shaft.
The HS vs LS is the stall speed of the torque converter. I went with low stall for a tighter feel and less flare when...
The TF999 should not have teeth on the converter. I would be concerned it is a weird mismatch to the proper combo of trans and converter.
TF999 converter options
You also need to be concerned about lockup vs non-lockup input shafts.
Lockup input vs non-lockup
My ‘23 4xe had bad wobble at 12k miles. Dealer replaced the steering stabilizer. It masked the problem for a couple thousand miles then it started again. I got under it while my better half turned the wheel back and forth. I could feel a popping in a steering rod end. Took it to the dealer and...
Can you do cross hip or intersecting hip roof systems with that truss system, or is it limited to rectangular floor plates?
Also, you need to add a price to all sales listings. I have heard the moderator is very strict on this policy as well as requiring for sale listings to be in the...
I think those dimensions are intentional, it prevents the boards from being classified as dimensional lumber. It puts them in the timber classification.
You can still get CCA treated materials. Usually it is for larger materials like 4x6 or larger. Some of the specialty lumber yards have it in smaller sizes, but it can’t be used for residential construction nor most commercial construction. On of the few uses where it is still allowed is piles...
If you have a substrate that is unable to take the expansion of conventional rivnuts, these work great:
https://www.mcmaster.com/products/rivets/screw-to-install-rivet-nuts-6/
The heater box above is an aftermarket engine coolant fed unit. It was used in the Morgan cars.
https://www.gomog.com/BLAIR/tech/melectrical/heater/Heater.html
I’ll bet it was used in all kinds of older vehicles to add supplemental heat.
Here is Eric’s documentation from MATI.
https://www.cj-8.com/threads/alaskan-postal-scrambler-cj-8-production-number-history-info-pics-from-usps-documents.3075/#post-15258
This indicates some had a Wabasto HL32 gas fired heater.
Some postals from the northern regions of Alaska had supplemental heaters. I think some were kerosene fueled and other were tied into the engine coolant. I believe all were retrofitted in Alaska by the local maintenance crews. But this is only hearsay from past research I have done. I don’t...
I try to find used original ones. Typically from e-bay or similar.
The aftermarket ones have all been trash and also have the wrong port sizes requiring Rube Goldberg adapters.
I wish the 4xe had true SPM. I can drive 97% with just the throttle, but the last 3% to stop at a light or stop sign, just sucks.
With regen set aggressively, you can control your speed very well with how you feather the throttle.
Makes for a very relaxed method of driving.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.