Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I have a steering box bracket from rusty’s off-road. I accidentally ordered two of them 6 months apart and found the old one after install. PM me if interested, I’ll make you a deal.
Almost a week later with no response to my request for more information. Oh well. It might be early in the EV lifecycle for good options. Electric GT is interesting but $60k+ is out of the spectrum in my view. What GM is doing with a common platform for any vehicle is potentially the future...
I just came across this site this morning. I requested more information out of my burning curiosity, but has anyone seen this or investigated this setup?
https://erevon.com/
Assuming the wire is good quality it depends on how you value your time. I could see easily spending an extra 20 hours running, sheathing, terminating, and testing this product over a Painless system. I'm slow, others might breeze through all of that.
A side note on the plastic capture nuts for the adjusting screws: The top one on the passenger side stripped when removing it. Remove the spring before the adjusting bolts and you might have better luck. I could not locate any type of replacement without buying a complete headlight assembly...
For what it's worth, here are a couple of pictures of the housing. At first I cut too little out and it became a pain to try to trim where needed. I just used a dremel to get the job done.
That makes sense. I cut down the perimeter and left the "tabs". I had to bend them out a bit to clear the light housing so it stands to reason that the back of the light provides that needed seperation. Thanks for following up.
@Big Walton, I am starting this modification but I ran into a question. When you cut the headlight bucket and remounted the secondary bucket that accommodates the adjustment screws, how did this work? The 3 "tabs" on the outer bucket touch the inner bucket for adjustment and appear to provide...
I’m not criticizing anyone’s decision. Generally, I like it and was looking forward to the release for a long time. I just can’t get past the taillights. They look like a mistake or an afterthought. I see trying to keep the tradition but something has to compromise. I would suggest narrowed and...
Just a thought but when you replaced the steering box and the steering shaft, did you also replace the coupler and the square berrings inside the coupler. If you lost one in the grease or if anything is loose around those attachments, it could cause your issue without having any movement in the...
That’s factory. The idea, I suppose, comes from the CJ-7 with a back seat. Most likely passengers enter from the curb side of the Jeep. You can buy pricey aftermarket brackets that tilt on both sides or you can buy oem brackets from a YJ. For me, I needed the lowering modification so the...
Yikes, that would take a lot of fabrication.
https://www.jeepglass.com/7686.htm
This isn’t cheap but it is quality and better than some of the thin metal replacements.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.