• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. M

    Brake warning light

    Another question, what size are the outlets on the mc - and which is which. One should be 1/2-20 the other should be 9/16-18. I believe the 1/2-20 is usually for the front, (I have no clue why the smaller fitting would be on the front line), again if the reservoirs are the same then it may...
  2. M

    Brake warning light

    Hmm - that would be wrong on the standard setup - unless i have completely lost it i thought that the larger reservoir (front brakes) was at the booster (back) of the mc. The smaller reservoir (rear brakes) would be at the front of the Jeep. ie the picture below is commonly seen but maybe wrong...
  3. M

    82 UK Spec Laredo Scrambler Build No 2

    Great Information - thanks
  4. M

    Brake warning light

    I am not an expert - but am having similar problems Is this a new problem - have the brakes worked ok in the past? If it's a new problem i suspect you either need to continue bleeding the brakes - or the mc is bad (or mc seals) It sounds like the shuttle in the proportioning valve is full...
  5. M

    Brake warning light

    Do the brakes work ok? Is the light on all the time - or just when you apply the brakes
  6. M

    Brake warning light

    Suggest to bleed the rear brakes - also adjust the rear shoes. If the light goes out when you release the pedal the shuttle in the proportioning valve is centering correctly. If it stays on the mc may have an issue.
  7. M

    twin their new life - 1984 fleet vehicles

    Those mirrors are serious - nice work
  8. M

    Rear Brake Line Size

    Thanks - I'm moving the prop valve to a bracket next to the mc and may fix that while im at it
  9. M

    Rear Brake Line Size

    What should the size of the brake line be from the proportioning valve back to the flex hose for the rear axle? I put 3/16 on mine - wondering if that should be 1/4 to match the size of the line from the master cylinder to the proportioning valve?
  10. M

    Heater Box Repair

    See if there is a recycle mark on it - i doubt it because of the age - if it did it would tell you what kind of plastic it is It's probably Polyethylene of some variety LDPE or HDPE, these can be heat welded with a soldering iron or heat gun if you are careful The heat weld will need some...
  11. M

    1st time hard top removal

    Just guessing - but it may be easier if it's warm, do you have access on the inside- i.e. can you cut the adhesive with a knife from the inside?
  12. M

    Alaskan Postal CJ-8 factory build oral history - what do you want to know?

    Here's a few simpler ones - prioritise with other q as you see fit. Did they do the Ziebart on the frame? Did they do the block heaters / coolant line heaters? Were they done in one batch? Any special treatment applied?
  13. M

    Worn Out Body Mount Bushings - 1” Body Lift Kit

    I can't comment on the difference - but I think 1" looks good
  14. M

    The CJ8 Alaskan Postal frame I rescued.

    So is this the kind of thing you find in AK? Just lying around in someones yard?
  15. M

    Alaskan Postal Scrambler/World Cab - count/registry - help build the list

    @bigwalton - what file types cab be attached -I just tried a test and .xlsx and .csv dont seem to work. Think it can be set in "Allowed file extensions can be set in the ACP -> Options -> Attachments" Maybe this kind of reference data would be better as a seperate page?
  16. M

    Fan to radiator clearance?

    Maybe turn the length down? - Do you have access to a lathe?
  17. M

    Holley Sniper with an automatic transmission

    Oh - and follow the directions in the manual to set the linkage - they are a little counterintuitive - words clamp and rod seemed mixed to me - but i figured it out in the end. Again if it works now you should not have to mess with it just b/c of the Sniper.
  18. M

    Holley Sniper with an automatic transmission

    Got more hoses in the way of mine than ag4ever Couple thoughts= The Sniper does not connect to the linkage for the TF999 - it just connects to the vanilla throttle cable, as long as you have a functioning throttle and TF999 then the Sniper should not affect the auto at all. Mines a RHD too -...
  19. M

    Holley Sniper with an automatic transmission

    Sorry failed last week and at lake for long weekend - :) here's the next best thing for now - (how i set mine up ) Below from https://oljeep.com/edge_small.html
  20. M

    Holley Sniper with an automatic transmission

    I can - give me a couple days - i just followed the workshop manual instructions and the auto transmission guides
Back
Top