• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. M

    Jack Points for Front Shackle Work

    Makes sense - thanks!
  2. M

    Jack Points for Front Shackle Work

    What's the recommended procedure for jacking the front to remove/replace the Front Shackles? The back of the springs seems a long way aft and there's nowhere obvious to spread across both frames, underneath the cowl mount? Or 3 jacks? not much room for axle stands either though :(
  3. M

    Project Panel Replacement

    If i were doing my frame and brake lines again i would relocate the prop valve to near the master cylinder, the stock location is a pretty bad design for maintainability. (My 2c)
  4. M

    Howell '81-'86 CJ 4.2L 6cyl Fuel Injection Kit

    There are a few options out there, i.e. different manufacturers, look around if you haven;t already. i have FI - (but not Howell), be prepared to mess with it for a while to get it running right, there is usually lots of tuning required even with a self tuning model. Overll im happy with mine as...
  5. M

    82 UK Spec Laredo Scrambler Build No 2

    Nice! Can you move the rad up?
  6. M

    What do you do to keep the rodents away?

    Moth balls in a few cloth baggies have worked for us so far. (Napthalene) Stupid mice got our pop up before we did that.
  7. M

    Custom Roll Bar Spare Tire Mount

    Nice, on both counts. Welcome!
  8. M

    Epic fails

    Break - or Brake ? I think you're right with break.
  9. M

    TF999 - Rebuild Options

    Isn't most of the lockup stuff in the torque converter, there's some complexity in the hydraulic circuit but the important bit is the converter. I mean that the quality of the convertor is the driver for the life of the lockup system. You may be best to dissemble all 3 and pick the best parts...
  10. M

    1983 Jeep Scrambler issues

    You may be better off with a Hydraulic Hose shop than NAPA - someone that sells repair parts/hoses for equipment. Nothing against NAPA but there are people that specialize in hoses
  11. M

    1984 Alaskan Postal Scrambler Build

    https://oljeep.com/edge_parts_man.html
  12. M

    Project Panel Replacement

    How is it possibly so clean, - the workshop i mean, still cleaning mine a couple years after i took mine apart!
  13. M

    Project Panel Replacement

    That's what i need - (ceiling mount propane heater) no point having a garage/workshop if its too cold to be in it - cabin fever's setting in.
  14. M

    Project Panel Replacement

    Thanks - I may have to remake my bracket sometime - It's the bracket at the inside of the lower tire carrier - to support the lower hinge
  15. M

    Project Panel Replacement

    Ohh - i wish i had seen that before i made mine (Postals didn't have one of these) looks to be about 0.1 maybe 12 gage - fairly beefy compared to 14 g
  16. M

    '84 Postal - Do What?!?

    Yep seems to be 3 pieces on my Postal - difficult to tell on the pic - the parts manual may be a better bet.
  17. M

    The Johnny Cash Project!--One Piece at a Time

    Looks like a good starting point, is it driveable? You may want to use it a while first?
  18. M

    Under floor support replacement

    I did mine on the sides - if you have a flat floor and some 2x to keep it off the bumps at the rear arches etc you should be able to get to both sides easily. Just roll it with care - need about 4 people. Best to weld some angle first across the top of the doors so that it keeps it's shape...
  19. M

    Epic fails

    Fire Sale? How's that connected?
Back
Top