• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. M

    I finally pulled the trigger

    Nice - what ceiling height would you say would be a minimum for that?
  2. M

    Now what?

    I would recommend a 12V electric pump - probably with a prefilter - by pass the mechanical pump Or a quality mechanical pump - maybe Delphi? What make pumps have you had? Other will have better recommendations - but it would be something like this...
  3. M

    AMC 20 axle

    Pretty sure they should be different lengths. Interested to see how you get on, i need to do this swap as well.
  4. M

    1984 Jeep CJ-7 full electric conversion

    Excellent - that' s lot of hard work i'm sure, thankyou for sharing!
  5. M

    Mikes wanderings

    Beautiful country Eh
  6. M

    Headlight switch

    My original switch was heavily heat damaged. I put relays in. https://www.danielsternlighting.com is a good resource
  7. M

    brake and fuel line routing pics

    You may want to consider mounting the proportioning valve on a bracket up by the m/c - much easier to bleed and check if it's accessible.
  8. M

    twin their new life - 1984 fleet vehicles

    Nice - looks good!
  9. M

    Engine won’t start

    Suggest you take a look at all the wiring in the area of the coil and starter, Mine was wrapped with duct tape (factory) i.e. separate the wires, check their integrity and redo the insulation at the splices. Do you still have this issue with the hot wire? I don't see that you answered...
  10. M

    Won't start

    Just to ask, this is a mechanical pump isn't it - i.e. will only get flow when you crank it.
  11. M

    84 Alaskan Postal.

    Err, you're not allowed to post that sort of commentary without pictures! :) (Welcome) and mine's F0ET019657
  12. M

    Powertrax amc20

    Hmm ok then - 1 pc it is Thanks
  13. M

    Powertrax amc20

    I don't see anything recent so bear with me. Thoughts on a Powertrax 9201202900 "No-Slip Traction" unit for my current 2 pc amc 20 4.10 setup? This is 99% street driven - but thinking of doing a bit of exploring in the hills. No LSD of any kind front or back - just thinking about adding...
  14. M

    Starting on restoration of 1981 Scrambler in Spain....

    Nicely done, i like the colour too.
  15. M

    81 CJ 258 Sniper/Hyperspark install review/questions

    Texas - Can't imagine you are going to need a manifold heater. Now Garrett County MD and 15" snow maybe - but there's this thing called salt here...
  16. M

    81 CJ 258 Sniper/Hyperspark install review/questions

    On my 84 Postal at least the wiring harness is basically in two sub harnesses - one for the pre carter setup and one for all the gubbins that is needed for the carter. There is little commonality - maybe a short length that has to be sorted. (I think that was the control module area). Just...
  17. M

    Half cab install issue

    You may need to loosen all the bolts on the upper b/head and the 1/2 top and just be prepared to open up a few holes to move the top a little. If the b/head is in the wrong position it will affect the top. Same with the doors really - be prepared to adjust them. Looks like your lh door needs...
  18. M

    Let's be serious for a minute

    Hoarder here, I still have a few odds and ends from my Morris Minor Traveller (Dave would know what one of those is)- fortunately they fit in one box.
Back
Top