Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Another question, what size are the outlets on the mc - and which is which. One should be 1/2-20 the other should be 9/16-18. I believe the 1/2-20 is usually for the front, (I have no clue why the smaller fitting would be on the front line), again if the reservoirs are the same then it may...
Hmm - that would be wrong on the standard setup - unless i have completely lost it i thought that the larger reservoir (front brakes) was at the booster (back) of the mc. The smaller reservoir (rear brakes) would be at the front of the Jeep.
ie the picture below is commonly seen but maybe wrong...
I am not an expert - but am having similar problems
Is this a new problem - have the brakes worked ok in the past?
If it's a new problem i suspect you either need to continue bleeding the brakes - or the mc is bad (or mc seals)
It sounds like the shuttle in the proportioning valve is full...
Suggest to bleed the rear brakes - also adjust the rear shoes.
If the light goes out when you release the pedal the shuttle in the proportioning valve is centering correctly. If it stays on the mc may have an issue.
What should the size of the brake line be from the proportioning valve back to the flex hose for the rear axle? I put 3/16 on mine - wondering if that should be 1/4 to match the size of the line from the master cylinder to the proportioning valve?
See if there is a recycle mark on it - i doubt it because of the age - if it did it would tell you what kind of plastic it is
It's probably Polyethylene of some variety LDPE or HDPE, these can be heat welded with a soldering iron or heat gun if you are careful
The heat weld will need some...
Here's a few simpler ones - prioritise with other q as you see fit.
Did they do the Ziebart on the frame?
Did they do the block heaters / coolant line heaters?
Were they done in one batch?
Any special treatment applied?
@bigwalton - what file types cab be attached -I just tried a test and .xlsx and .csv dont seem to work.
Think it can be set in "Allowed file extensions can be set in the ACP -> Options -> Attachments"
Maybe this kind of reference data would be better as a seperate page?
Oh - and follow the directions in the manual to set the linkage - they are a little counterintuitive - words clamp and rod seemed mixed to me - but i figured it out in the end. Again if it works now you should not have to mess with it just b/c of the Sniper.
Got more hoses in the way of mine than ag4ever
Couple thoughts=
The Sniper does not connect to the linkage for the TF999 - it just connects to the vanilla throttle cable, as long as you have a functioning throttle and TF999 then the Sniper should not affect the auto at all.
Mines a RHD too -...
Sorry failed last week and at lake for long weekend - :) here's the next best thing for now - (how i set mine up )
Below from https://oljeep.com/edge_small.html
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.