Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I am in the process of installing the Novak kit on my jeep, using an sm465 transmission. I used a master cylinder from an old YJ 4 banger with manual trans.
The Novak slave cylinder has thread adjustments on the slave tip, as well as mounting slots that you can use to position the slave...
I put an AGR box in a cj8 one time and remember that it was crazy how tight the tolerances were. I don't think it had anything to do with it being an AGR, but I'm not sure of that. I could barely get a wrench in there to tighten it, and even then I could only turn it a tiny bit at a time. It...
You don't need to pull the whole dash out just to check the bulb. You can just pull the bulb and its socket holder out of the gauge. It has some clips that just hold it in place.
Do you know what brand your system is? I am going to attach a picture of some instructions that came with the one that I bought off somebody (used price for a new/never installed system!). It is from Wrangler Power Products. I don't know if you have the same system and need the diagram for...
Hey Rustycrawler...thanks for posting this thread! I was getting ready to post the exact same question myself! I hope some more people will post up some pics.
Robert - where did you go to get your exhaust done?
I really like the Novak site and have steered people there for good info on several occasions:
http://www.novak-adapt.com/knowledge/np435.htm
http://www.novak-adapt.com/knowledge/model_300.htm
-Mike
At that price for a full top, and if that's his jeep, you should've asked him how much for the whole jeep! (or is that yours?)
Anyway, good buy for you! Congrats!
Add some spotches of white and black and you'll look similar to JC's old urban camo!
thanks for the reminders on the drain holes for the floor pan...I need to add that to my (long) list!
Oh, yeah...one more question:
Am I setting myself up for fuel fumes? The rollover check valve is going to be mounted in the stock location in the driver rear corner under the tub, but I'm wondering if I need to run it through some kind of charcoal filter or something to minimize the fumes...
LT1 swap, doing away with the original charcoal canister and pollution stuff.
I have a rollover check valve.
Do I still need a liquid check valve? Mine was worn out and damaged.
I have the 15 gallon tank with the two vent hoses that originally went to the liquid check valve. I was...
Hmmm...where have I seen such quality work before? Oh yeah, on all your other posts!!! It must be nice to be able to fab so well!:cool: Then again, I'm getting lots of experience doing everything two or three times!;)
As always, it's great to see your posts and pics!
-Mike
I bought mine from Jeepdoc/Krage. It was a few years ago, but one of the main guys there (maybe one of the owners?) also owned a scrambler at the time. Seemed like good people to deal with.
I used to run 2 rear seats in mine when my kids were younger. It was great because my wife could ride shotgun, and then each of my kids could bring a friend along for the ride!
I didn't have the safety harnesses mentioned above, though, which would probably be a good idea. Another good...
Thanks!
Axles are from a military CUCV full-size blazer ("Commercial Utility Cargo Vehicle"). Dana 60 front and 14 bolt rear. Stock 4.56 gears and rear detroit locker. I added an ARB up front.
I traded the stock single rear wheel hubs to somebody for some dual rear wheel hubs. Everything...
Ha Ha! That would probably help...but I still have a bunch of other activities, too!
The only thing I really need to quit is to quit making excuses for why I'm not working on it! I'm making some good strides now...
Hey, thanks for reminding me...I have to call Richard and invite him over...
Well, finally decided to get back to the build. (I know, I know...:o;)) I'm hoping to be able to make it to the National Scramble in June, but I have A LOT to do before then.
Here's a couple of quick progress pics.
1. Had to fab and weld in some new mounts into the rear of the tub.
2. Also...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.