Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
My recommendation from that list would be the Rodeo/Passport Dana 44 rear and I'm running a Scout 44 rear. The Scout 44 has become somewhat expensive to work on as there are some unique parts. I'm needing to redo the brakes including new drums and it'll be cheaper to convert to disc rear. I'm...
Not quite the work bench, but the current project...
I'm working on the rear axle to find the source of an annoying squeak. I haven't worked on the Scout 44 in years and didn't realize how much of a unicorn it has become. What started as a brake job might just turn into a disc brake upgrade...
The only other things I would add are long soaks with PB Blaster, welding a nut on and attempting to tighten slightly before trying to remove. I've had success with each of those methods in the past.
More progress. This time I focused on a half door storage solution to get them up off the floor for the summer. I'm pretty happy how it turned out. They are modified commercial hinges from Home Depot. Total investment $15.
If you want to measure from the body seem between the fender and the main tub to the wheel well opening, I can do the same to figure out how much you'll gain.
I run TJ flares on mine. The rear wheel well had very little trimming. The front had several inches. Between the extra width width of the flares (along the body, not out from it) and the amount removed from the body, I actually run CJ7 rocker protection. I'm guessing that equates to about 6 or 7...
Doesn't Rausch Creek fall under an essential business as a mental health treatment facility? I know I go insane when I don't spend enough time wheeling. :ROFLMAO:
I struggled with the same part of the install on mine. I had the added complication of TFI ignition upgrade and the Howell fuel injection system wires as well.
I just finished the Painless wiring kit installation and have a few nagging issues I'm working on clearing up. The only one I haven't been able to figure out is getting the parking brake warning light on the dash to turn off.
I checked the switch at the parking brake first and unplugged it with...
I love it when a plan comes together!
The Minnesota Landscape Arboretum just reopened to vehicles for drive through, so We all loaded into the Scrambler today to go. Here are a few pictures from the trip... you weren't allowed to get out of your vehicle, so none of the 8 from the outside.
More progress. I cleaned up some more of the wiring and got the cage back in. I'm hoping to have everything back together to take it out this weekend to enjoy the beautiful weather with the family.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.