• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. mxracer919

    Crusty looking leftovers

    For sure, guessing he tripped or started to cut back the other direction right before I hit him. Tweaked the bottom side of the intercooler, ac condenser, and steering cooler. Bent intercooler brackets as well. Have one of the MOVE bumpers on the way. Should prevent it from happening again...
  2. mxracer919

    Crusty looking leftovers

    Had a blast at nationals, even being in a cj7. Good clean fun, almost made it the whole weekend without issues after running with the extreme group. No Jeep issues outside of a fitting on the ram that loosened up and ripping off one of my rear bump stop bushings.........but as far as my...
  3. mxracer919

    Crusty looking leftovers

    All custom built. 1.75 dom tubing and the bushing kit from Barnes 4x4. Skinned it with 3/16 plate then a strip of 3/4” UHMW.
  4. mxracer919

    Crusty looking leftovers

    No updates. The news on the harness pretty well knocked the wind out of my sails. Figured there was no point in busting my balls for the last week to make the nationals deadline with a complete Jeep with no engine harness. Plan is now to just show up to nationals with my cj7 which I was going...
  5. mxracer919

    Crusty looking leftovers

    Yeah, part of flying by the seat of your pants. Yup, that is the 4.3 Jeep. It doesn’t need really anything could hop in it and drive it there. But have a few things I’d like to address. Yeah, definilty a lot closer to home than last year! The year it was at Moab I said I was going to...
  6. mxracer919

    Crusty looking leftovers

    I know. It is what it is, I should have planned a little better.....but I’m not known for that, haha! When I spoke to him initially it was a 3-4 week turnaround. It was a few weeks before I sent it in, so he must have had several show up before I sent mine in.
  7. mxracer919

    Crusty looking leftovers

    Well, bad news. Spoke with Wayne from 150tunes and he is currently still working on harnesses recevend 4/20. Which is a whole month before he received mine. Doesn’t look promising at this point. Considered pulling the harness out of the cj7 that I did a few years ago but don’t really want to...
  8. mxracer919

    Crusty looking leftovers

    That’s my intent.......haha!
  9. mxracer919

    Crusty looking leftovers

    Had somewhat productive day. Set the body on and all bolted down. Installed he steering box and trying to figure out what geometry will work best. The guy I bought the axle off of had it set up already with high steer and rod ends for steering. The rubicon express springs are thicker than...
  10. mxracer919

    Crusty looking leftovers

    New CHIEFWAHO rear crossmember welded on, installed the new body bushings I had (not sure where they came from but not crazy about the red part, but can tolerate it for the fact that I don’t have any out of pocket on them). Body and frame are reunited!
  11. mxracer919

    Crusty looking leftovers

    Yeah, it’s definitly a nice perk. From talking to other guys from different departments it seems to be a rarity.
  12. mxracer919

    Crusty looking leftovers

    Rolled the chassis on the trailer last night and took it to work with my to plumb it in down time yesterday. Have everything plumbed, hope to set the body on it today or tomorrow.
  13. mxracer919

    Crusty looking leftovers

    Thanks! I have a Jd2 model 4 tubing bender air/hydraulic. Picked it up used a couple of years ago. Would have opted for the model 32, but couldn’t pass up a deal as good as it was. It’s beefy......like overly beefy, haha! Yeah, seems to be the best way to route it. Exhaust can’t really...
  14. mxracer919

    Crusty looking leftovers

    I bought them from Barnes 4x4. http://www.barnes4wd.com/Crossmember-Mounting-Set_p_112.html
  15. mxracer919

    Crusty looking leftovers

    Started routing fuel lines. Kinda finished the crossmember up too.
  16. mxracer919

    Crusty looking leftovers

    Went and picked some fruit last night. Have had this restored scrambled chassis for a couple of years under a tarp behind dads shop. It WAS pretty much ready for a tub, but I pulled the new fuel tank and brake lines off it.
  17. mxracer919

    Crusty looking leftovers

    I will eventually, but for now just going to keep it simple. I’m bringing my cj7 to wheel at smorr. I imagine I will add to the crossmember for it to resemble what I built on my 7.
  18. mxracer919

    Crusty looking leftovers

    Have been wanting to get it put together, and with the National scramble coming up I figured now was a good as time as any.......nothing like a 4 week build, I work best with a deadline! We started our summer off with a trip to Disney world as soon as school was out for summer. I shipped my...
  19. mxracer919

    Crusty looking leftovers

    Wanted to be able to document the process. Have been acquiring parts for some time and pretty much have everything. Bought this 81 as a basket case minus the axles and drivetrain back in December 2015. Put it out behind dads shop and figured I would get around to it. Fast forward to last...
  20. mxracer919

    Any Jeep pics you want to share?

    Been a steady couple of weeks. Drug home what's left of a spring special. Ran across a GE J10. Then while in the area I was picking up the GE I caught whiff of a stepside honcho. Then followed all that up with a 80 v8 cj7 with a whole pile of good parts.
Back
Top