• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1983 Jeep Scrambler Resto Mod

5280Sapper

CJ-8 Member
City
Peyton
State
CO
Well fellas I had to restart my build thread from the data crash.. I have acquired a few more parts over the last few weeks. So not to much has changed.. I still don't have a name for my Jeep yet but my wife says she needs to see it finished in order to name it so I guess that was a go ahead and get what you want and built innuendo! My tentative plan will follow and I really want to keep it classy and not to gaudy and crap. Everything will have a purpose and it will be able to endure the hardest trails and still drive on the street and overland with the family. My mentality is I'd rather build it overkill then not to have what I need rather then not.

Platform
1983 Jeep Scrambler

Color to be determined

1.75 .120 and .250 wall DOM through out. removable tied in cage
original steel maybe add some aluminum protection
Soft top best top is all I have seen so far
rhino lined interior maybe same color as exterior
PRP seats and a single for my little girl and room for our huge dog
aluminum storage drawer system in back
CO2 tank

Driveline

SuperDuty Dana 60 front with ARB and 5.38's with Artec Truss
SuperDuty Sterling 10.5 with ARB and 5.38's with Artec Truss
Trail Worthy Fab 2 or 3 speed Hero Case
Howe Full Hydro Steering
Using a forged 6.4L 392 HEMI I have
545RFE or 66RFE trans

Suspension

Double triangulated 4 link front a rear... maybe consider aluminum links at some point,
Going to use Radflo Coilovers with remote reservoirs and some bump of sort.. I'll make my own sway bar set up the can be disconnected quickly and easily.

42" Good Year MTR/Kevlar tires
B.A.D. Wheel beadlocks
I plan on stretching the wheelbase a few inches and potentially comp cutting the corners or enlarging them for the wheels and tires

I'm sure things will change and most will dictate on what my wallet has in it! I'm always open to suggestions and expertise from you guys who have done these.. I have only built big trucks and my current JKU. My plan is to keep the first couple of spaces for pictures but I'm sure it will be forgotten about and just become a really long thread!
 
Last edited:
The body

QjLWUlJ-2.jpg
 
Picked up the 42's o Saturday!! My JKU on 2.5" lift and 35's My buddy works for Discount Tire and score me a killer deal couldn't pass on them.
MyAblDw-1.jpg


p1hMQLs-1.jpg
 
Nothing fancy to post but a treat was left on my door step tonight while we were out taking my Daughter trip or treating.. Energy Suspension body mount kit.. So its a win and we woke up to snow covered land this morning...!!
 
Few more little things arrived today.. Ballistic Fab 2.63 Forged joints might get 8 more trying to decide if I wanna use heims at one end of the links or maybe even metal cloth duro joints or all Ballistic joints.. and ordered some good quality stainless bolts for the body mounts.

IMG_1514.jpg
 
I used Stainless steel bolts on everything I could for my Stump Jumper Scrambler build but not for the body mounts. Most people think S/S bolts are stronger than Carbon Steel but they are actually much softer. IMO you'll be better off not using the S/S bolts for body mounts and definitely don't use them for motor mounts.
 
I used Stainless steel bolts on everything I could for my Stump Jumper Scrambler build but not for the body mounts. Most people think S/S bolts are stronger than Carbon Steel but they are actually much softer. IMO you'll be better off not using the S/S bolts for body mounts and definitely don't use them for motor mounts.


I agree for sure.. don’t typically use stainless on load bearing items.. but did some decent research and my body mounts should be ok using 316 grade stainless which yields a higher tensile strength vs 18-8 standard stainless. On bolts that will have extreme loads I’ll use F911 hardware and grade 8 in most other places.
 
I agree for sure.. don’t typically use stainless on load bearing items.. but did some decent research and my body mounts should be ok using 316 grade stainless which yields a higher tensile strength vs 18-8 standard stainless. On bolts that will have extreme loads I’ll use F911 hardware and grade 8 in most other places.

I agree. It sounds like you are headed in the right direction.
 
I agree. It sounds like you are headed in the right direction.


I'm by no means an expert! but I can read so hopefully they suit me...

I did decide to just order 8 more Ballistic joints since they are on sale and its veterans day can't beat the price vs. forged rod ends.
 
Well fellas been very busy.... the holidays absolutely sucked.. started a divorce... after my wife had bout of infidelity... But on the bright side sold my JKU and got me a new tow rig 2018 Ram 2500 Laramie! got some fab tools and did some side work to buy more project parts! finished my chassis, picked up a 545RFE trans for the 392 going in mine and scored a bonus 5.7 hemi that I sold to a fiend for his JKU. once i have some more space i'll get my tub over and when my motor mounts from Speedway show up and trans mount I can start mocking up the engine and trans!
 

Attachments

  • IMG_1671.jpg
    IMG_1671.jpg
    84.4 KB · Views: 195
  • IMG_1672.jpg
    IMG_1672.jpg
    96.2 KB · Views: 188
  • IMG_1623.jpg
    IMG_1623.jpg
    63.4 KB · Views: 192
Very sorry to hear about the family situation, but the truck and that frame look awesome :thumbsup:
 
Sorry to hear about the divorce. The frame is sweet i have been mulling something similar around in my head for quite a while.
 
Sorry about the family situation.

That tube frame is pure awesome! I've wanted to try that myself for quite a while.
 
Thanks fellas... **** happens right... if it doesn't kill ya just make you stronger..

Played around some more already this week.. got some more DOM and buddy locally gave me a jk winch mount for free so I cut it up and grinder it clean last night and today I'll notch some tube and weld it in. And ordered some nice d ring tabs that are pitched and chamfered for 1.75 tube, once they get here I'll tack them on.. once it warms up I'll go get my tub.. yesterday I picked up a CJ grill for $20 so I can't complain! And it was from the original owner so thats really cool to have some parts that have a story! And found a company out of Utah that hand makes some cool shifters and that would work with my Mopar 545RFE trans. He also does a military discount.. so ordered one of them.
 

Attachments

  • IMG_2772.jpg
    IMG_2772.jpg
    62.3 KB · Views: 168
  • IMG_2844.jpg
    IMG_2844.jpg
    76.5 KB · Views: 169
  • IMG_2825.jpg
    IMG_2825.jpg
    67.8 KB · Views: 173
Back
Top