• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1985 cj8 build

What size tire and rim combo are you running???

35x12.5x15 bfg mt's (km) on the pro comp 1031(15x8).
I mentioned above that there have been some updates
but not enough to take pic's... but the tires stick out of the
fender flares just perfect IMO. But I'm also running 60-61" wms-wms
axles...
 
My friend just stop over with his new to him 2008 rubicon with a 4" procomp lift kit... Looks nice!

DSC01986-1.jpg


DSC01987-1.jpg
 
When is he getting the new tires to match? 4" lift should clear what, 37s?
 
When is he getting the new tires to match? 4" lift should clear what, 37s?

lol. I told him the same thing! it has 31,000 miles on it. the PO must have used it as a mallcruiser... it's really clean (especially for a OHIO JEEP)!!! he was asking questions about a super charger. I said a super charger would be cool. but a hemi would be even better!
 
Last edited:
others do this?? lol

Hmm... looks familiar. :)
 

Attachments

  • IMG_0266.JPG
    IMG_0266.JPG
    102.1 KB · Views: 353
  • IMG_0284.JPG
    IMG_0284.JPG
    126 KB · Views: 350
Last edited:
Well the wheel is still turning and the cage is moving right along.
here are some pic's:

IMG956406-1.jpg


IMG956100-1.jpg


IMG959689-1.jpg


More to come. still working on the house. and try to clear out some of my jeep parts.
7jeeps7kings
 
I like your cage design-looks great!

Thanks. It took some time to figure out what I was looking for. And I had to add/subtract some things. I didn't want a crazy cage that would: 1. be hard to get in and out of the jeep whether you were in the back seats or the front, 2. being able to raise and lower the soft top with ease. 3.still protect and look good.

I looked at a ton of cages in person and online. and finally came up with this one. I can't take credit for the work being done. My buddy does all that. I hate to continue to say how great he is... but his work says
it all!
Thanks,
7jeeps7kings

side view with the top polls down:
IMG958987-1.jpg


side view with the top polls up:
IMG955860-1.jpg
 
Last edited:
Well I'm pulling together piece by piece a cj10a project. I'm just posting a few teaser pic's. I still need to arrange a pickup on the tub. I've had the grill now for a few weeks. And the fenders finally came today after waiting some time to get them. so here you go:

DSC02334-1.jpg


DSC02325-1.jpg


DSC02336-1.jpg


DSC02335-2.jpg


I will put a build thread together as more parts come in. but for now I'm just in the collection process. lol. O and I'd like to thank craig for getting this cj10 project going!
7jeeps7kings
 
Wow...sounds neat. What are the build plans? If that one turns out half as nice as your Scrambler is, it should be great!
 
1/4 ton trailer bed...
1/4 ton trailer bed...
1/4 ton trailer bed...
1/4 ton trailer bed...
;)
 
Wow...sounds neat. What are the build plans? If that one turns out half as nice as your Scrambler is, it should be great!

-LJ frame (which I already looked at a couple so far)
-full size 60 front and 14 bolt rear (unless I come a cross a matching set of 9's and I
have the money for them. LOL)
- maybe a 4bt or another ls platform.
-NV4500
-dana 300
-If I can find a export cj10 bed that would be ideal (otherwise I will have to hit the
think tank)
-and a bunch of other goodies. but first I have to finish the cj8! I'm just collecting the hard to find parts now...

1/4 ton trailer bed...
1/4 ton trailer bed...
1/4 ton trailer bed...
1/4 ton trailer bed...
;)

LOL.

thanks,
7jeeps7kings
 
There is a guy here selling a complete CJ (basket/ruts victum) that has an NV/Dana300 cheap. He's in NY I think.?.
AFAIR isn't the frame for these a modified Wagoneer frame with the body mounts basically moved around...ish? Someone here was selling one of those too, weren't they? Maybe just food for thought. :)
 
Thanks for looking out for me. I'd pass on the original cj10a frame (and there is one on here for sale).And depending on which motor I plan on running will depend on which nv I will run (to save on adapter cost). If I go with a 4bt I be looking for a dodge nv that came be hind a straight 6 cummins, and if I go ls I'll be looking for the nv that came behind a sbc... But thats way down the road from now. After I get the tub and the lj frame it will be a while till I buy anything more... Thats until the cj8 is done...lol
thanks,
Drew (7jeeps7kings)

There is a guy here selling a complete CJ (basket/ruts victum) that has an NV/Dana300 cheap. He's in NY I think.?.
AFAIR isn't the frame for these a modified Wagoneer frame with the body mounts basically moved around...ish? Someone here was selling one of those too, weren't they? Maybe just food for thought. :)
 
Last edited:
That's a really nice cage.

thanks, its getting there. I still have a ton of things to do but
the majority of of the big items are out of the way. I'm trying to
guess what I should buy next: tilt auto column, radiator, wiring
harness, fuel pump, hydro boost power brake unit. I'll now more
once I'm done paying for the cage... I was planning on breaking the jeep down after all the metal fab work is done and start painting/ final assembly...
But my one buddy thinks I should get it running and driving first then break it down.
And i think he is right... lol.
thanks,
7jeeps7kings
 
Well not to much has been going on with the build. Kinda waiting for spring to break open
up here in OHIO. I'm sure as stated above trying to figure out my next move. Been researching
a ton on radiators, steering columns, wiring harness...

On a side note a friend of mine just picked up a 2013 jeep JK 2d AEV Edition. 6cyl, manual,3.73 gears
2" lift 33" tires... Its cool. Not sure if its $40k + cool. He was talking about getting a Hemi edition...
but that was more like $60-$80k depending on bells/ whistles... He is happy so thats all that matters!
Here some pic's:


2013030195093149_zpse67e2342-1.jpg


2013030195093139_zpsf77683d9-1.jpg
 
Back
Top