• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

33's with 2.5" lift or 4"

Here's mine. OME 2.5" Lift with YJ stock shackles, gave me about 3" lift total, sitting on 32x11.50's

 
If that's a 4" lift with a 1/2" extra in shackles, it's about 2-4" taller than my 4" lift kit. That is an awesome color/decal combo, and probably my favorite! Something is off on the decals, though, but I cannot quite place it. What manufacturer supplied the decals for you?

Markness,

Yea, the BDS lift is up there. Has settled a little since then but not much, I am very happy with it. The graphics are from Phoenix Graphics. I think they are the only ones that make stock-style replacement graphics. The only thing that I have noticed that is different from "stock" is the color is slightly off on the replacements(but it's all that is available). I still love they way they look, they do however look different like you said. Here is a stock pic for you:


 
Do you have a pic of the Scrambler on the 33x9.5s? I am thinking about not going wide if I go to a 32 or 33 inch tire next time.

Sorry that I don't, Dain. However, it is my opinion that a 10.50 wide tire on the W/T CJ axles would fit perfectly inside the fender flares. I thought the 9.50 looked great when I swapped them across for an hour just to see the difference between the N/T and W/T. Keep in mind that my original chrome wagon wheels on the 1981 model CJ8 are the 15x8, so the extra inch wheel width with the 33x9.50 tires might provide a similar outside "plumb-line" as 10.50 wide tires on 15x7 wheels.

To be very specific about the appearance, the aesthetically pleasing views of the Scrambler from the front, side angles and profile look perfect with the 9.50 wide tires. However, sometimes I think a Scrambler looks a little "tame" from a direct straight-on view from the rear with skinny tires. This is easily compensated for with mud flaps.

I overwhelmingly prefer the street and trail performance of a skinny tire on such a light-weight vehicle. Everything about the driving and steering performance of the '81 on skinny tires feels far superior to that of the '83 on fat tires -it's hard to explain, but the '81 just feels lighter and more nimble on 33x9.50, versus the 33x12.50 tires. I can't wear-out those fat tires on the '83 soon enough!
 
The graphics are from Phoenix Graphics. ...The only thing that I have noticed that is different from "stock" is the color is slightly off on the replacements(but it's all that is available).



Thanks for the original picture comparison. I've noticed the color difference in some other Scrambler pictures viewed in the past. I'm not certain, but I think there was actually an original Laredo decal set with that color. In your stock picture, the decal color scheme was referred to as "Orange and Yellow" (?), or something similar. Your new graphics may have been the "Brown and Orange" (?) Laredo decal option. I may be completely off-base on this, since I've rarely studied the various Laredo decal options from the '80-'83 period, but I'm almost certain that I had once seen a stock Laredo with the brownish decals.

Anyway, I think I figured out what my eye caught when viewing your new decals, and the two pictures above helped me pin-point it. On the rear quarter side, the new decal looks as though it follows the lower tub edge. You'll notice that the originals were applied straight (or level) and did not dip at an angle. Am I seeing the new graphics photo correctly, or is this a mirage due to the dark body color and shadows in that area? Also, if the horizontal stripe does actually follow the body line, does it not align to the bottom end of the curved wheel stripes?
 
Thanks for the original picture comparison. I've noticed the color difference in some other Scrambler pictures viewed in the past. I'm not certain, but I think there was actually an original Laredo decal set with that color. In your stock picture, the decal color scheme was referred to as "Orange and Yellow" (?), or something similar. Your new graphics may have been the "Brown and Orange" (?) Laredo decal option. I may be completely off-base on this, since I've rarely studied the various Laredo decal options from the '80-'83 period, but I'm almost certain that I had once seen a stock Laredo with the brownish decals.

Anyway, I think I figured out what my eye caught when viewing your new decals, and the two pictures above helped me pin-point it. On the rear quarter side, the new decal looks as though it follows the lower tub edge. You'll notice that the originals were applied straight (or level) and did not dip at an angle. Am I seeing the new graphics photo correctly, or is this a mirage due to the dark body color and shadows in that area? Also, if the horizontal stripe does actually follow the body line, does it not align to the bottom end of the curved wheel stripes?

Yea I couldn't tell you which color came with my Scrambler originally. The decals that were on it were OEM, and it is a Laredo but they were re-applied at some point so you could be right about the color types. And you are also right about the decals on the rear quarter panel, also the slight imperfections with the wheel well stripes. I had the body shop that painted the Jeep apply the decals, and they did a great job....no bubbles, no tears etc but the instructions I left them weren't followed to a T. I had pictures of the old decals and noted the particulars of the rear quarter stripes and wheel well stripes. They aren't perfectly level on the rear quarters but they don't completely follow the angle of the body either. They aren't perfectly original but work for what I wanted.

Good eye
 
I looked back to the previous page in this thread and found your rear angle photograph. It shows the curved wheel stripes aligning both in the front and rear of the horizontal lower body stripes. Thus, Phoenix Graphics did not design the dimensions of their reproductions correctly, or the quarter panel stripe would naturally run level across the rear to align to the wheel stripes; in other words, the curves wheel opening stripes were designed too long. There's no way a body shop would apply those any differently than your team did for you. I wonder if PG is aware of their error?

Here's a couple enlarged photo to depict my description.



versus...

 
sepajepy-1.jpg

gyjyjy3u-1.jpg

yde7uqa4-1.jpg

myjamuze-1.jpg



Sent from my iPhone
 
Do you not have a cell phone made after 2000??? They all come with decent cameras.
I've eaten potatoes that take better pictures than that.

Bad Karma, your sarcasm always makes me laugh, but the potatoe comment- well it brought tears to my eyes.
 
Posting it so it remains forever in case I change it. :D
 
.
.

There are some great looking CJ's in this thread, along with a few epic posts...LOL!

Bump for more pics.

.
.
 
Ahhhhh. One of the great threads of the decade. :rotfl: thanks for bringing it back to the top :)
 
Back
Top