• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

4.1 or 3.73 ? Axle swap gearing calculation (?)

MomoJeep

Basic User
City
Seattle
State
WA
Am I missing anything?

Using this gear ratio calculator: https://www.novak-adapt.com/knowledge/transmissions/manual/t4-t5

Stock setup: 28.5" tires / T5 with .86 5th gear / 3.31 axles
65mph in 5th gear = 2181 rpm

Current setup: 32.5" tires / AX15 with .79 5th gear / (4.10 axles)
65mph in 5th gear = 2176 rpm


Please check my assumptions:
(1) Stock CJ-8 tires were 28.5" Dia?
(2) By picking 4.10 axles, the engine rpms stay essentially the same even though tire size & 5th gear have changed. But is there any reason the rpms should be different? The Jeep is heavier now.
(3) When I'm cruising down the freeway, 5th gear will be used the most?

Regarding #3, I currently cruise in 4th because I've got 3.31 axles. If I change the calculations for 4th gear, both transmissions are the same (1:1). Now the axle ratio that makes the rpms equivalent from stock to modified is 3.73. In 4th the rpms @ 65mph would be 2755, probably too high.

Question: do people with 5speeds cruise in 5th primarily?
 
I like 4.10 for 32-33” tires with a 5 speed
It overdrive. It’s a good balance between power and economy.
 
I have had 4.88s and 4.10s with 4.0L/AX-15 and 33's in my 8. The 4.88s were awesome on the trail and hell @ 60mph. The 4.10s (now) are great all around. The best TJ combo I ever had 100% on pavement was 32's/3.73's.
 
I have had 4.88s and 4.10s with 4.0L/AX-15 and 33's in my 8. The 4.88s were awesome on the trail and hell @ 60mph. The 4.10s (now) are great all around. The best TJ combo I ever had 100% on pavement was 32's/3.73's.
Which motor in the TJ?
 
4.0L likes to be at higher RPMs cruising; something like 2700. 4.2 likes slower cruise.
 
Back
Top