• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

81 CJ 258 Sniper/Hyperspark install review/questions

It was single digits last week. Doesn't happen often but when it does why not be prepared. It's already there just need to repair the wiring.
If the insulation is cracked I would sleeve it with a layer of heat shrink tubing. There is already an additional layer where the wire goes into the heater and when I took one apart, I did not see where the heater was likely to fail with deteriorated insulation.

IMG_0167.jpeg IMG_0150.jpeg IMG_0148.jpeg IMG_0139.jpeg

The one broken in pieces was destroyed from trying to pry it out of an intake. Best way to remove it is gently tap it out from the carb throat side. The carbon locks them into the intake and makes it hard to remove them.
 
Last edited:
For more detailed info on the under hood stuff;


I think this is the updated location for this (now defunct) site http://dale02.home.sprynet.com/home.htm

Here is the page discussing the manifold heater http://gleebledorf.com/manifold.html

Vacuum hose diagram http://gleebledorf.com/vacuhose.html

View attachment 112463
I used this sire when deciding how to customize my installation.
@ag4ever Thanks for the link, I'm trying to rebuild my library after the loss of my hard drive.
At least some of it got loaded and saved here after this site was redone. (y)
 
Back
Top