• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

83 Scrambler Restoration Project-Georgia

It never ends

Well....got all the wires loomed up and cleaned up....and got the oil pressure issue resolved...finally :bow:.....so I took it for a test drive and it rode great! Just had one problem....I could not get any of the gauges to work. So we slowly worked backward to figure out the problem. It took a few hours...but we figured it out....are you ready....while looming all the wires in the engine compartment...I inadvertently put a screw through the firewall that went right through a main wire housing that went to the main gauges and it shorted them out and fused them together as they got a direct 12V's....crap!!!! :angry:

Soooooo...it is torn back apart and I ordered new gauges and new speedometer assembly gauges (fried those as well) and will be putting it back together when they arrive. Here is a picture I took when I thought I was done....see that bracket holding the loom to the left of the brake cylinder behind the air filter....that is the culprit!!! The saga continues....

attachment.php
 
Last edited:
That sounds just like something I would do :banghead: It looks great, sorry about the trouble!
 
Fender flare question

I need to install wider fender flares....I have looked at several options....is there any flare out there that is wider than the OEM where you do not have to cut the jeep....really do not want to cut if I can keep from doing that. Thanks in advance for your help! :thumbsup:
 
the Xenon flares (part number 8310) are what I used on mine. The front fit perfect, the rears are actually made for a YJ but they fit pretty well and you dont have to cut anything. They are $350 but they are nice.
 
the Xenon flares (part number 8310) are what I used on mine. The front fit perfect, the rears are actually made for a YJ but they fit pretty well and you dont have to cut anything. They are $350 but they are nice.

Thank you!!!! Great pictures and awesome Jeep....cannot wait to see the finished product. Love what you did with the breaklights! CH :woot:
 
Thanks! The brake lights have a ring of red for stop tail and turn and the center is white for backup. I dont know if it will ever be done but I am driving it now. I will try to take some pictures this weekend but it is a little ugly. I had to put my rusty crappy doors on it for now it was only 20 degrees this morning.
 
The latest

Well...have not posted in awhile as work/family/kids has kept me pretty busy....as well as all the Holiday stuff....but here goes....

To say that I was a novice on this when I started would be an understatement. I have fond memories of working with my Dad as a kid and teenager on cars back in the 70's and early 80's....but it had been a long time since I had truly worked on a car....I mean beyond signing the service or repair bill! What I knew when I started this project was I always wanted a CJ....ever since my neighbor bought a fully loaded CJ7 Laredo in 1980...and to me there is no better looking Jeep than the Scrambler...so off I went...

Wow....it has been an experience...and I have had a blast (in between the tears)....but I never imagined it would take this much time to restore an old Jeep. But what I have found through this process of trial and error (and constant creative modification) is that to do it "right" may mean that you cannot do it "right now." Anyway....here are the latest updates....

First...I am changing out my new T5 for a 700R4...not sure what I was thinking...but driving around Atlanta is not fun with a stick....and my wife does not like how hard the clutch is to depress...so to make everyone happy I am going to the 700R4. Yes...it is a lot more $$$ than I wanted to spend....but at this point...what the hell...I am so far over budget on this thing it is a moot point. I did a lot of research and am going with a Novak system with all the conversions for my new crate AMC 304 (that I am pulling and replacing....more on that later) and my Dana 300. They have been great to work with and a tremendous resource. It is literally in transit to arrive on Dec 27th (from Utah) and we are going to put it in next week. I will let you know how that goes...

Next...the front bumper...I put on a Rugged Ridge tubular bumper...it looked fine (pictures of it back in earlier post)....but I was worried if I ever had an accident...or had to winch out of an area....if it would pass the test. No doubt I have rectified that concern...I bought and mounted (then later welded) a Body Armor bumper and winch plate that is rock solid (and heavy as hell) to my 8. It is now part of the frame....sorry....I am a little OCD. Problem was it came with a finish that did not match what I had (grey hammered finish)...so I sanded it down and painted it the color of the nerf bar and the rear bumper. I LOVE IT....:D. Now I can also tow it behind my Yukon as I can attach a tow bar to the bumper....and I added more front lights. Here is a picture of the finished product....

attachment.php


Also...added new Xenon flares (thanks to the folks on this board)....no more getting pasted with water as I drive in the rain....they were shown in the picture above and look and work very well....and I did not have to cut anything.

The Oil pressure problem is completely fixed thanks to the guys at Bulltear....who were equally awesome to the Novak guys. Highly recommend these guys....very knowledgeable and take you through the process when you are novice like me. Anyway....no more oil pressure problems...and here is a picture of the finished product after I mounted the relocation kit to the front right fender well.

attachment.php


The inside is done....I have actually installed a retro post digital radio since this picture...and while I am not thumping with some major system....it does what I need as I was really just looking for some noise...and I just could not bring myself to cut the dash. Also got rid of the OEM replacement gauges I had bought new. I found gauges out of a 1985 CJ7 on Ebay that were in great shape. Nothing against the OEM replacement guys...but all those gauges were crap...much better to find old originals...IMO :twocents: Anyway, here are pictures of the interior...

attachment.php


attachment.php


Got the Jump seat put in the back....and I think I have figured out a way to get 3 Point seat belt for the kids without cutting into my roll bar (my wife and I both want this)...more to follow....here is a current picture...

attachment.php


Now to the engine...bought a new crate 304 V8...got it painted (see way back post) installed and running great...until it developed a knock. Long story...but ATK is sending me a new engine...will get it next Monday....so we have the engine torn back apart and will install it with the new transmission over the Holidays.

I think that is all for now...but thanks again to the folks on this forum for helping me muddle my way through this project....and to my good friend who owns the shop were the money pit seems to have taken permanent residence!

Merry Christmas and Happy New Year to all...CH
 
Last edited:
Wow, that looks fantastic!! :drool:

Someday I'll manage one that nice :fingerscrossed:
 
My dad was in town last week (from VA) and saw my CJ for the first time in a year or so. He said "Wow. That's going to be one of the nicest Scramblers in the country." I said "Thanks. But there are tons of beautiful Scramblers out there... including this on right here in GA.. It's charcoal grey with tan interior... "

Seriously, If they looked like that in 1981, Jeep may have sold a respectable number of them. Nice work!
 
looks fantastic... I wouldn't have guessed that the tan seats would look so good against the grey, but it's a great combo..

I'm going to have to make a little rubber stopper for the spare tire carrier handle (on the end of the action handle) like yours.. to prevent scratching the tub.. good idea..

btw, I think the triangular rubber stopper in your swing out spare tire catch is on upside down (the piece just below the two bolts that hold the DS receiver end bracket on, I think it's suppossed to be flipped up the othe way)
 
looks fantastic... I wouldn't have guessed that the tan seats would look so good against the grey, but it's a great combo..

I'm going to have to make a little rubber stopper for the spare tire carrier handle (on the end of the action handle) like yours.. to prevent scratching the tub.. good idea..

btw, I think the triangular rubber stopper in your swing out spare tire catch is on upside down (the piece just below the two bolts that hold the DS receiver end bracket on, I think it's suppossed to be flipped up the othe way)

Thanks you sir! I will fix that this weekend....figured I had a 50/50 chance when I put it on!
 
My dad was in town last week (from VA) and saw my CJ for the first time in a year or so. He said "Wow. That's going to be one of the nicest Scramblers in the country." I said "Thanks. But there are tons of beautiful Scramblers out there... including this on right here in GA.. It's charcoal grey with tan interior... "

Seriously, If they looked like that in 1981, Jeep may have sold a respectable number of them. Nice work!

That is awesome...do you have pictures of yours on here? Let me know....I have another friend with a Scrambler down near midtown...I'm in North Fulton up in the burbs....we will have to go get them muddy one of these days. Today would be a fun day with all the rain! CH
 
Question

Does anyone know where I can buy a screw on protector to go on the edge of the Jeep bed to protect the edges of the bed for when my kids climb over into the Jeep or when I use it to haul stuff? I am thinking something very similar to what I put on the bottom of the Door Jams to protect the paint when you get in and out of the Jeep? Thanks for your help in advance...as always! CH
 
poke

Just a poke...does anyone know where I can buy a protector to go on the edge of the Jeep bed to protect the edges of the bed for when my kids climb over into the Jeep or when I use it to haul stuff? I am thinking something very similar to what I put on the bottom of the Door Jams to protect the paint when you get in and out of the Jeep? Thanks for your help in advance...as always! CH
 
Don't think anyone makes anything like that specific to Scramblers.
 
maybe the rail caps that bolt on for a Bestop supertop? I don't have one, but if it installs the same way a CJ7 Supertop does, it would give you a metal trim that's custom fitted to the top of the bed, including the bend around the rear corners... :shrug:

maybe one of the guys with a Supertop can clarify.. and you could possibly order them as replacement parts from Bestop..
 
Back
Top