• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

after a long, hard trip from AK..

Eric,

If you look at the picture you posted of the restored postal, there are two metal hose clamps around the roll bar on the upper left. If you look at the two pictures that show the left side of the roll bar on our postal, you can see them as well. They were there when I got it. Any idea what they were used for? Did or does yours have them as well?
 
No clue, mine didn't have them. I don't think I have any other photos of that one that would show that area better unfortunately.
 
Just read thru this and Eric must be in nirvana having another postal in the same state with him. How close are you to each other. Do your wives know this?????



To lazy to go back and look at the pics with the 2 clamps in question, but perhaps for a fire extinguisher??

Looks like a fun project.
 
jak inc said:
The most interesting pic for me is the one looking from the rear through to the dashboard seeing everything reversed. The mirror image dashboard pad, the dash, steering wheel, etc. It is pretty interesting that AMC would make all these custom parts for such a short run of vehicles. How much time was spent removing that foam? Nice work... looks like it cleans up pretty well.

Jeff

Roughly 10-12 hours. Not really sure as I spaced over a couple weeks in the evenings for a hour or two at a time.
 
TexasAg77 said:
Just read thru this and Eric must be in nirvana having another postal in the same state with him. How close are you to each other. Do your wives know this?????



To lazy to go back and look at the pics with the 2 clamps in question, but perhaps for a fire extinguisher??

Looks like a fun project.

My wife and I met Eric and his wife a couple months ago at his place and then went out for lunch. We are about 2 hours away...

:D
 
TexasAg77 said:
To lazy to go back and look at the pics with the 2 clamps in question, but perhaps for a fire extinguisher??

Wow, that's a new definition of lazy... you can't even scroll up! ;)

Yeah, haven't gotten to see this postal in person yet, but that will change :thumbsup:
 
Well, after messing all summer on trying to get it running, a low mile 258 was purchased as a donor as was set into place tonight. Final bolting and wiring hookup to be this Saturday morning. Then have to figure out the loose steering. On insurance for another month yet...so might get a little driving time yet this year.

camera phone pics:

1015081829a-1.jpg


1015081845a-1.jpg
 
I'll say it again here... ger er done and drive down here to visit me.

We can get what might be the only photo in existence of two of these things sitting side by side! :thumbsup:
 
just a couple pics showing what it looks like at the moment. Steering is better than it was last spring, but still too loose for my liking. Got the rear door rebuilt, side patched, and drivers floor done at a local shop last spring already. Things turned out alright. Motor is now a low mile 232, but with stock gearing it is a bit or a dog in the power dept.

IMG_4170-1.jpg



When we got it...


postal001-1.jpg


postal002-1.jpg



Door now..

IMG_4177-1.jpg


IMG_4175-1.jpg


IMG_4176-1.jpg
 
That's AWESOME! Very nice work there... reminds me how much body work mine needs :banghead:
 
Looking good! Is it me or is the drivers rear wheel off centre? My Passenger wheel is off, rubbing on the flare!
 
Back
Top