I'm currently replacing the ring and pinion in my 81 CJ8. The original pinion bearing was shimmed behind the inner bearing cone. I understand some were shimmed this way and some were shimmed behind the pinion bearing. The installation kit came with shims for the pinion bearing but not for the inner cone. I don't think it will matter which way it is shimmed but it came originally with a 100,000th shim behind the inner bearing cone. I would put the old shim back but it was cracked when I removed it. The problem is I can't find the shims for the bearing cone. I can find plenty for the inner bearing. Does it matter which waay I shim the pinion?
