• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

AMC 360

ran across another issue. power steering belt runs into vacuum of distributor.

My 360 and 401 weren't timed properly until the advance can was rotated around considerably toward the thermostat bypass hose from where you have it. It clears the belt fine there.
 
I'm in process going to a 360 built by Rick Jones on mine with PSC Steering, AX15 trans, Atlas, Novak Hydraulic clutch (which we brought out right next to the booster, TDC skid plate (which clears) Novak Radiator and fan assembly, and a Howel TBI. Novak has been a great resource as put this thing together.

IMG_5441.jpgIMG_5335.jpgIMG_5333.jpg
 
It helped me to go to a longer than stock ps belt to have more room to rotate the distributor. Just an inch or two. I have an HEI distributor and it eats up some real estate there.
 
What good will the external PS reservoir be when it it lower than the pump reservoir itself?
 
What good will the external PS reservoir be when it it lower than the pump reservoir itself?
It was just hanging there, the mount wasn't on for that picture. It sits up just above the top of the radiator when the mount is on it. Its not as High as I would like between the two, but its still above the pump and gravity will still assist. The location of the PS Pump as one of the few things I didn't like about the 360 set up, but it should be fine. We need the rez for the Ram assist that it will have.
 
Is that battery tray specific for a CJ ? Or is it modified to fit ? I'm not good at reading backwards. Thanks
 
okay motor heads, started it up today. idle at 750-800 timing was at 0. took up to 2500 timing was at 10-12. hooked up vacuum advance took it up to 2500 timing was 40. does all that sound okay. still have the issue of my vacuum advance being in the way of power steering belt.
 

Attachments

  • 1615420921992.png
    1615420921992.png
    1.4 MB · Views: 6
Is that battery tray specific for a CJ ? Or is it modified to fit ? I'm not good at reading backwards. Thanks
Are you referring to mine. It’s a universal fit genesis tray so it took some custom brackets burned on to make it work.
 
still have the issue of my vacuum advance being in the way of power steering belt
Okay, let me start by saying I have zero experience with the AMC 360...
Is there any reason that the hold down for the distributor can't be loosened and the distributor base rotated to relocate the vacuum advance diaphragm for clearance, and then just relocate the plug wires to correspond with the change?

In my mind I see pulling the cap to see which cylinder the rotor is pointing to, rotate the distributor base for vacuum advance clearance, and relocate the wires on the cap so the rotor points to the cylinder it originally did.
Each 45* of rotation would equal moving the plug wires one space on the cap. :shrug:

As I said, I don't have experience with this engine, but I figured I might learn something.
 
Back
Top