• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Anyone know anything about wet blasting?

rstickley

SOA Member
Gold Member
SOA Member
City
Branch
State
La
I am thinking about starting a portable wet blasting business and was wondering if anyone has ever delt with someone that has done it, or has any experinece whatsoever. Some of the brands I am looking at are Dustless Blaster, GeoBlaster and Clean Blaster. I am looking harder at the GeoBlaster but it is more expensive. Any thoughts?
 
Not sure about the commercial stuff. But, I have used the at home thing that Northern sells.

It uses a siphon tube to bring the sand up into the Pressure Washer stream. The problem is that the sand has to be completely dry or the siphon will clog, and it goes through sand quick.

It does a good job removing stuff from heavy steel like the frame, but I would not use it on body sheet metal. I have seen a system where they use Soda on Sheet metal in a water stream, but it seems like the paint guys are having a lot of issues with soda on metal. It is reacting with the paint and then lifting once the job is finished and out in the real world. Seems like some of the paint manufactures are not standing behind warranties if soda blasting was used to prepare the base.

Check into this before really jumping in on it. Seems that Soda companies are pushing the material hard, but real world experience may not be as good as promised.

I like the idea of using water to keep dust down, but in practice not sure how it works.

Are you looking at full up commercial stuff like heavy steel, or more things like sheet-metal in cars???


Carl
 
These systems use recycled glass for automotive use instead of soda. They are also able to do fiberglass without damaging gelcoat.
 
Sounds like that might be a good alternative then. Should leave a good Paint-able surface. The nice thing is that the water will help keep the heat in the metal down.



Carl
 
a guy here in town..that does my sandblasting and powdercoating has gotten into this recently. he put a big compressor, water tank, and soda/sand blaster on a trailer and away he has gone. so far he is doing pretty good. he is using the water with the soda and its awsome. i have watched him do the roof of a van..and with the water...the soda just runs right off. without the water....it would coat his entire yard and it would look like it snowed.
 
Back
Top