• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Atlas T-Case

Scott Mine

Legacy Registered User
City
Arnaudville
State
LA
OK - So UPS delivered this ATLAS II T-Case yesterday to the house. They were pretty slick about shipping it without it getting damaged. They put a plastic bag around 3/4 of the t-case and then did a spray foam to contour the t-case and fill the box up. Then i also got this other box with the cable shifters, oil and other essential parts needed for installation of this thing. So i will keep you updated with pics and progress over the next few weekends. The weather here is off & on nasty so it is hard to get work done since i do not have an enclosed shop yet.
 
So that is where my TCase went. They sent to the wrong address. Scott, you have my address, so just mark through yours and put mine on there so I can get that thing here. :thumbsup: :D

Truck
 
give us the specs.

I had Mike price me an Atlas 2 yesterday.

I have got to get my mind made up on what trans I am going to run and get one located. I am waiting on a guy to get back with me about a couple of TH400's. I hope to go pick them up tonite.

How long did it take for deliver?
Mike was told 4-5 weeks.
 
Atlas

32 spline input and 32 spline for both outputs.
3.0 : 1 gearing ( Putting it behind my Klune-V )
Cable Shifters
Passenger Drop ( Naturally :thumbsup: )
I run mine behind a TH400 that Mike Built.

Last night i kinda started putting it together checking everything out.

I will get some pics out soon i hope.
 
You put all that together and it will be sticking out the end of Jeep!

You may have to add some back on!
 
Congrats!

Sounds like you're going to have a blast with that! I've been thinking about an Atlas but so far my 300 is staying together plus i'm not rich like you! ;)

Looking forward to seeing it in action!
 
Sounds like a great combination! Look forward to seeing you guys again!
 
Got my Atlas 4 speed through Mike and it was over 8 weeks. Turbo 400, diesel torque converter, both sides in low, you can get out, make your sandwich,kick the tires or you know and its still only moved a few feet.:D :D
 
4speeds are now out about 12 weeks and 2 speeds are 4 to 6. Must be nice to be that busy.:rolleyes:
 
The Prez was back in "Low Range" again this issue giving the SOA another plug...... Wht a Prez!:thumbsup: :D
 
Low Range

Man i will have to go and read it and see what they put in there for us.
 
OK - So i started assembling everything together yesterday. We had 1/2 day off due to Mardi-Gras.

Got the Klune-V attached to the Atlas, mocked it up and filled it with oil. going in for installation in the Jeep. YEAH RIGHT !!!!!!!!!!. The muffler had to come out then it all bolted up good. Now i still need to fit it up where it needs to go. With it hitting my floor the case still hangs down about an inch below the frame rails. So now i am having to cut to floor for a 5x5 section so that piece in the back for the shift rails can come up about 2". That way i can keep my flat skid plate under the jeep. Depending on all of that falls i may have to move the support for the grater ball mountback a little which in turn will move the rear axle back a few inches.

I will see about getting pics out soon.
 
kwitcherbitchin. Welcome to my world.:D Sunday mornings. Spike TV. If jesse can do it in half hour, whats your problem?
 
Last edited:
DId I hear muffler removed?

Scott, Where do I send donation for a muffler that has some noise reduction? You might have others that have had pleasure to follow wanting to anti-up also. Get it ready as wheeling weather is coming and what is this about a day for Mardi Gra????
 
1/2 day off to get drunk? :eek: What a job. I am alllllllll in on that donation for a new muffler:thumbsup:
 
Donations????
Scott should be paying us for all the hearing loss!!:p
 
Muffler

Man stop it alright !!!!!!!!!!!!:D I am about to pee in my pants laughing soo much at this. You guys have not heard my NEW muffler. :angry: :thumbsup: :D ......... But i will sure take the donations.
 
Back
Top