• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

ATX '83 Restoration Project

J

jscarth99

Basic User
City
Austin
State
TX
Background...
I bought my jeep 28 years ago as my first vehicle and drove it all through high school and college (10 hours each way!). It was a great budget car and it has never been worth ($) to anyone else what it was worth to me, so i kept it even though it has sat parked for years at a time over the past 20 years. She still runs, but not well. I babied the Carter Carb for years then finally replaced it with a Webber 32/36. That worked ok for a while but then got finicky and it wouldn't start reliably (eventually found the Nutter Bypass and that helped a ton).

Regardless, I figure it is time to get her running and looking good again. I'll try to post updates with my progress. I'm very open to thoughts and suggestions from those of you that have been down this road before. I'm not planning to go crazy with the rebuild and I'd like to keep it looking mostly stock but with more power and most importantly reliable.

Plans:
I already replaced the brakes (rotors, drums, and new brake booster - WOW! it stops now!)
Bodywork (starting with floor pans and minor rust in the bed)
Engine - Thinking 350 or LS, but definitely fuel injected
Transmission - It came stock from the factory with Automatic Transmission. (any thoughts from the community on keeping auto vs. changing to Manual?)
Repaint (probably frame off)
Wheels/Tires

Sounds simple, right?
 

Attachments

  • 20211106_104737.jpg
    20211106_104737.jpg
    125.5 KB · Views: 22
Not quite finished cutting out the floor pan, but this shows some of the under structure that you have to deal with.
 

Attachments

  • 20211114_111538.jpg
    20211114_111538.jpg
    121.3 KB · Views: 21
Bought the Key Parts floor pan from Quadratec. It is not an exact match but really dang close. Trimmed out areas that didn't need to be replaced and left edges in areas that I thought would be easier to fit and weld. Will need to fab a small piece for the corner under the console area. Not too bad for a Sunday morning's effort.
 

Attachments

  • 20211115_073505.jpg
    20211115_073505.jpg
    98.3 KB · Views: 27
I'll pipe up since you asked: automatics are for boring modern cars, Cadillacs and Lincolns. Manuals are fun to drive and a pleasure to wheel.... just like Jeeps.

You'll have to put a hydraulic clutch in anyway to put an AX15 or NV4500 in and you'll need to use a YJ pedal tree anyway for that so what transmission it came with originally is almost irrelevant.

Another benefit to a manual is the theft deterrent it offers given most car theft today is done by folks who have likely never driven anything why three pedals.

I also believe that converting an automatic Jeep to a manual is just the right thing to do. Let's face it; with the doors off, Jeeps just look plain silly with only two pedals.

Great story. Where did you and the scrambler grow up and go to university? Do you have any pictures of it back in the 90s? Did she have a name?
 
Last edited:
jscarth99 said:
Background...
I bought my jeep 28 years ago as my first vehicle and drove it all through high school and college (10 hours each way!). It was a great budget car and it has never been worth ($) to anyone else what it was worth to me, so i kept it even though it has sat parked for years at a time over the past 20 years. She still runs, but not well. I babied the Carter Carb for years then finally replaced it with a Webber 32/36. That worked ok for a while but then got finicky and it wouldn't start reliably (eventually found the Nutter Bypass and that helped a ton).

Regardless, I figure it is time to get her running and looking good again. I'll try to post updates with my progress. I'm very open to thoughts and suggestions from those of you that have been down this road before. I'm not planning to go crazy with the rebuild and I'd like to keep it looking mostly stock but with more power and most importantly reliable.

Plans:
I already replaced the brakes (rotors, drums, and new brake booster - WOW! it stops now!)
Bodywork (starting with floor pans and minor rust in the bed)
Engine - Thinking 350 or LS, but definitely fuel injected
Transmission - It came stock from the factory with Automatic Transmission. (any thoughts from the community on keeping auto vs. changing to Manual?)
Repaint (probably frame off)
Wheels/Tires

Sounds simple, right?
Click to expand...
Dude, this is awesome. Stories like this are exactly why this place exists! I'm gifting you a year's membership on the forum so you can add more than one photo per post. :bacon: can't wait to see it progress.
 
bigwalton said:
Dude, this is awesome. Stories like this are exactly why this place exists! I'm gifting you a year's membership on the forum so you can add more than one photo per post. :bacon: can't wait to see it progress.
Click to expand...
Wow! And thank you very much!!! I've loving this community already!!!
 
Chamba said:
I'll pipe up since you asked: automatics are for boring modern cars, Cadillacs and Lincolns. Manuals are fun to drive and a pleasure to wheel.... just like Jeeps.

You'll have to put a hydraulic clutch in anyway to put an AX15 or NV4500 in and you'll need to use a YJ pedal tree anyway for that so what transmission it came with originally is almost irrelevant.

Another benefit to a manual is the theft deterrent it offers given most car theft today is done by folks who have likely never driven anything why three pedals.

I also believe that converting an automatic Jeep to a manual is just the right thing to do. Let's face it; with the doors off, Jeeps just look plain silly with only two pedals.

Great story. Where did you and the scrambler grow up and go to university? Do you have any pictures of it back in the 90s? Did she have a name?
Click to expand...
Thanks for the input/feedback! I'll definitely take all that into consideration!

The Jeep (Bessie) and I are originally from the Texas Panhandle (Amarillo) and when to college at Texas A&M University! Whoop! I'll have to look for some old photos when I go back to my parents at Thanksgiving ;)
 
Welcome and great Scrambler! If the rest of the paint looks as good as the driver’s side does I would just buff it out instead of repainting it. You‘ll be surprised how well that old paint responds with a little love.
 
jscarth99 said:
Thanks for the input/feedback! I'll definitely take all that into consideration!

The Jeep (Bessie) and I are originally from the Texas Panhandle (Amarillo) and when to college at Texas A&M University! Whoop! I'll have to look for some old photos when I go back to my parents at Thanksgiving ;)
Click to expand...
Paging @TexasAg77 ;)
 
An Ag living in the TU backyard..... that could get interesting. Saw'em off !!

Welcome and I'm glad you kept it all these years. Will look forward to the continuation of this thread.
 
Gig’em.

I don’t recall seeing that around town when I was in school. I am assuming you were there around the time I was.

’97
 
Another long term '8 owner. And an Ag at that. Welcome and Gig'em. Am sure you are enjoying the meltdown on the 40 acres,,,
 
ag4ever said:
Gig’em.

I don’t recall seeing that around town when I was in school. I am assuming you were there around the time I was.

’97
Click to expand...
Yup, I was there from '95 to '00 and lived on the north side 4 of those years (Walton Loads!), so I didn't drive much. Gig'em!
 
Project update... shaping and welding the patch panels is a slow process (for me). And the learning curve has been steep.
Passenger side complete, driver side still in progress. Had to cut out and replace a small patch panel on the side where the rust made it almost all the way through toward the front of the floorboard.
 

Attachments

  • 20211128_141444.jpg
    20211128_141444.jpg
    90.8 KB · Views: 12
  • 20211128_144628.jpg
    20211128_144628.jpg
    99.6 KB · Views: 12
  • 20211206_214542.jpg
    20211206_214542.jpg
    91.7 KB · Views: 12
  • 20211207_205606.jpg
    20211207_205606.jpg
    79.8 KB · Views: 12
  • 20211207_205602.jpg
    20211207_205602.jpg
    89.2 KB · Views: 12
  • 20220103_195950.jpg
    20220103_195950.jpg
    90.7 KB · Views: 12
  • 20220103_195954.jpg
    20220103_195954.jpg
    86.4 KB · Views: 12
  • 20220103_200023.jpg
    20220103_200023.jpg
    106.1 KB · Views: 12
Chamba said:
I'll pipe up since you asked: automatics are for boring modern cars, Cadillacs and Lincolns. Manuals are fun to drive and a pleasure to wheel.... just like Jeeps.

You'll have to put a hydraulic clutch in anyway to put an AX15 or NV4500 in and you'll need to use a YJ pedal tree anyway for that so what transmission it came with originally is almost irrelevant.

Another benefit to a manual is the theft deterrent it offers given most car theft today is done by folks who have likely never driven anything why three pedals.

I also believe that converting an automatic Jeep to a manual is just the right thing to do. Let's face it; with the doors off, Jeeps just look plain silly with only two pedals.

Great story. Where did you and the scrambler grow up and go to university? Do you have any pictures of it back in the 90s? Did she have a name?
Click to expand...
Here's some old pictures that I found (sorry they are pictures of pictures) ;)
 

Attachments

  • 20211126_134246.jpg
    20211126_134246.jpg
    87.5 KB · Views: 7
  • 20211126_135318.jpg
    20211126_135318.jpg
    108.1 KB · Views: 7
  • 20211126_135330.jpg
    20211126_135330.jpg
    112.5 KB · Views: 7
You must log in or register to reply here.
Back
Top