• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

AutoZone props: 4.0L “water pipe” in stock

bigwalton

Alaskan Postal nutjob
FORUM MANAGER
SOA Member
City
Dexter
State
MI
Have to give the local AutoZone props, I usually only use them in a pinch but they had a water pump and thermostat housing for the postal’s XJ motor in stock (not that unusual) but also had the “water pipe” to go with it (for heater box hose attachment). Dorman 56398

Assumed that I’d have to struggle pretty hard to find one of these to replace the rusting stock unit I had and was floored when it was on the shelf.

Found out they also welcome people dropping off oil/fluid and filters at the back door when closed. My local part store doesn’t take any of those and other stores I’ve used for it have been pretty particular about it and many seem annoyed to deal with it at all.

11180AEB-9839-44C1-A3CD-6933570B4905.jpeg
 
Bumping this because the water pump on the LJ’s 4.0L sprung a leak today and I had to come back to find this part number because the AutoZone search couldn’t come up with it and the LJ’s is rusted badly at the same bend.

Still in stock at my local store, going to grab it in the morning. :headbang:

The entry for autozone is “Dorman hose 56398”, no search for “water”, “coolant” or “heater” found it. It’s category is “Hose (bypass)” for whatever reason.

Keywords: Heater hose, metal heater hose, heater fitting, water tube, water fitting, coolant fitting, coolant pipe, coolant tube, heater hose elbow, metal elbow, metal heater elbow
 
I'm glad you posted this! I noticed the one on my son's '98 Cherokee leaking last night. Thanks!
 
Funny how things work sometimes. What sucks is that you have to pull the pump or remove half the front of the engine (if it’s even possible then) :rolleyes:

Because of that, part of me wondered about making one up out of straight pipes and whatever angle fittings you’d need to get to where the heater hose could pick it up. Probably would end up more durable than this thin formed pipe :shrug:

on the one I put on the postal and again on this one today, I’ll hit it with a coat of paint to try to get it to hold up longer.
 
My 2005 LJ had this pipe on it, I had to reinstall the OEM pipe back on to a replacement water pump. No rust on the pipe at all :shrug:

On my red Scrambler's 4.0, I am running all 4.2 front accessories, including water pump, so no need for the pipe. Wouldn't a straight pipe adapter, coupled with a longer heater hose, work as well :shrug:

I did like the LJ's heater hose routing/securing method much better than the CJ, so the pipe piece is a good idea, coupled with the newer style valve cover heater hose clamp things :thumbsup:
 
My 2005 LJ had this pipe on it, I had to reinstall the OEM pipe back on to a replacement water pump. No rust on the pipe at all :shrug:

On my red Scrambler's 4.0, I am running all 4.2 front accessories, including water pump, so no need for the pipe. Wouldn't a straight pipe adapter, coupled with a longer heater hose, work as well :shrug:

I did like the LJ's heater hose routing/securing method much better than the CJ, so the pipe piece is a good idea, coupled with the newer style valve cover heater hose clamp things :thumbsup:

Yeah, totally if you either didn't mind not running the nice, molded hose or if you used a coupler go from the end of the molded hose to a section of new hose that you bent down to reach the new outlet.
 
Yeah, totally if you either didn't mind not running the nice, molded hose or if you used a coupler go from the end of the molded hose to a section of new hose that you bent down to reach the new outlet.

The only downside I see is that it's really cramped down where the hose clamp would attach. You pull the idler to get better access after removing the fan belt, but that's a pretty minor inconvenience and it's not something you remove much :shrug:
 
Back
Top