• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Ball joint press

Spieg

Scrambler Junkie
Lifetime Member
City
Aurora
State
CO
I replaced my passenger side ball joints using a loaner press from Oreilly (got the press and the 4x4 kit). This got the job done but only with some MacGyver style modifications. Seems like this universal tool didn't work very well on my D30 because of the angle of the mounting surfaces. I have to do ball joints on the driver side now and don't want to fight the same puller again so I'm probably going to try one from another store. Has anyone found one of the store loaner or inexpensive specialty presses that works better?
 
No give credit to them.. I call them a use once and throw away tool place. As if you use it the second time it will self destruct .
 
Funny story to harbor freight. I bought a brad nailer when I was doing wood trim in my new house and we used that thing all day no problems.. The second day I hooked it to the air supply and it was a automatic machine gun.. Lol We look at each other and said well it was the second day. Like clock work..
 
I bought a $26 4.5 inch angle grinder from Ocean state Job lot back in 1998. I figured a year at best I would get form it. Well the POS is still going strong to this day and i use it as much as my Dewalt and Makita grinders. Each one has a different type of wheel on them for fab work.
 
I bought a bearing splitter which was true to its name - when I was trying to remove a bearing it ended up splitting because of the cruddy Chinese steel it was made of.
 
I bought a HF knock out tool to punch a hole in a firewall. The threads stripped before it would pull through the sheet metal. Not even good for one use. No problem with steel hammers.
 
I've changed out 8-10 ball joints with it and it's still going.
 
OTC makes a good ones but for the money, and how often you might use it. It might be cheaper to by a new HF one each time.
 
I did the auto parts store rental and MacGuyver routine. Didn't even think to look at Harbor Freight, probably because I had bought Torx bits there early on and that didn't work out.
 
Back
Top