RichandPoor
New member
- City
- Suffolk
- State
- VA
All but 2 of my body mount bolts sheared off when I removed the tub. Most were corroded down to an 1/8" of diameter. What are my options as it looks like I will have to cut the body in those sections to replace it, then weld it back up?
Could cut and tap my own plates or cut/drill plates and weld a nut on the backside
eBay option:
I messaged the seller to ask what kind of metal they are using, zinc vs galvanized vs bare steel but no response
Have seen Classic Enterprise option but it isn't listed on the website. May call and ask since I need to order a few panels anyway.
Could cut and tap my own plates or cut/drill plates and weld a nut on the backside
eBay option:
NEW! Correct Jeep Body Bushing Bolt Nut Kit '76-'86 CJ5 CJ7 Scrambler USA Made | eBay
This is a complete set of 11 nuts enough to do CJ5 or CJ7. When you're after originality these are them!
www.ebay.com
Have seen Classic Enterprise option but it isn't listed on the website. May call and ask since I need to order a few panels anyway.
