oldtruckwelder
Basic User
- City
- Jackson
- State
- SC
After reading all of the successful booster conversions on the forum I decided I would go for it.
Purchased the booster from Morris 4x4, really nice kit, somewhat easily installed.
Like stated earlier definitely need to make/buy a grommet for the 2-1/8 hole left in the fire wall prior to bolting bracket.
Now the bad part, old brake lines will not reach to MC due to booster extending from firewall.
Uncoiled them and made them reach, but they looked really bad.
Bought new straight lengths of 1/4 and 3/16 tubing, flaring tool. The location of the proportioning valve and the interferences around it made this the worst part of the conversion. Got the old lines out and will fab new soon.
Really would like some suggestions on where to pull the vacuum from and some new air intake ideas due to factory breather will not fit with new booster.
1983 cj8
258
Purchased the booster from Morris 4x4, really nice kit, somewhat easily installed.
Like stated earlier definitely need to make/buy a grommet for the 2-1/8 hole left in the fire wall prior to bolting bracket.
Now the bad part, old brake lines will not reach to MC due to booster extending from firewall.
Uncoiled them and made them reach, but they looked really bad.
Bought new straight lengths of 1/4 and 3/16 tubing, flaring tool. The location of the proportioning valve and the interferences around it made this the worst part of the conversion. Got the old lines out and will fab new soon.
Really would like some suggestions on where to pull the vacuum from and some new air intake ideas due to factory breather will not fit with new booster.
1983 cj8
258







