• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Brake peddle rebound

Grey Fox

SOA Member
Lifetime Member
City
Bountiful
State
UT
A few months back I had a new Navajo master cylinder brake booster installed. The peddle has never had a quick or definite return, more like a very slow, brakes are still on return, put your toe behind the peddle and pull it back. The braking works very well, the lines have been bled multiple times. My mechanic says the return is controlled by the hydraulics and at this point is scratching his head. We've put a spring on the brake peddle arm to pull it back which is working fine but that's only a band aid. Any ideas?
 
Call Off Again and ask them, I have the same system. Mine works great.
 
John, Good advice. Just called them and the system uses a spring on the peddle arm to pull it back. I guess I was relying to much on my mechanic's opinion. Thanks again.
 
Kim,
Mine from Vanco was doing the same thing. Was driving me crazy and Van as well trying to talk me through trouble shooting. Turns out the bolt on the swing arm of the bracket was to tight and binding the return up. Loosened it up and everthing was fine except me looking like an idiot :o

Truck
 
Truck, Thanks
Turns out that the peddle arm needs a spring on it for the return. I was led to believe the return was controlled within the master cylinder. Its not, needs the spring, all's good. Kim
 
Grey Fox said:
Truck, Thanks
Turns out that the peddle arm needs a spring on it for the return. I was led to believe the return was controlled within the master cylinder. Its not, needs the spring, all's good. Kim

No it's not, that is bad, do not add a spring. Disconnect the booster from the brake pedal (just the part that attaches to the brake pedal). Activate it by hand and see if the return problem is fixed. If it is you need to readjust the extension.

Again, adding a spring is bad, it can lead to the rod in the booster coming out and you have 0 brakes.

Questions? 800-256-6295 ask for Van
 
Grey Fox said:
Truck, Thanks
Turns out that the peddle arm needs a spring on it for the return. I was led to believe the return was controlled within the master cylinder. Its not, needs the spring, all's good. Kim

Sorry if this sounds like a stupid question, but did you lubricate the linkage? My linkage just needed a little white lithium grease to get the return working as it should.

Rob
 
mmmmmm, interesting. Well I was told by the tech at Off Again 4X4, that the Navajo brake booster uses a spring for the return. In fact he said the stock jeep brake set up uses a spring.
 
Dude, I trust Van...he has been in the business a long time. Maybe give him a call and talk to him direct. He is a straight up guy and won't steer you wrong.

Truck
 
Truck said:
Dude, I trust Van...he has been in the business a long time. Maybe give him a call and talk to him direct. He is a straight up guy and won't steer you wrong.

Truck

YUP....I agree with Truck. Call Van!

He bailed my fanny out one time!

Vinny
 
Got back in town and called Van yesterday, Haven't pinned it down yet. There is no rubbing or friction issue. May end up sending the booster & cylinder to him. Very helpful guy. Makes me wish I had bought his set up. Another odd thing is with the engine off it has a very quick firm return. With the engine running the return is slow and mushy.
Kim
 
Back
Top