• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Can you converts a CJ8 frame to coil springs?

wmcurryjr

KS JEEP
City
Salt Lake City
State
Ut
Hi,

Excuse my ignorance. Can a stock CJ8 frame be changed over for coil springs front and back like the new YJ frames? Is there a kit out there? Any information would be appreciated.

Wally
 
Don't know of any kit but then again I haven't looked. However, any vehicle can be converted either way, its just a matter of how hard.

Since I had a Grand Cherokee with coils before and like the ride, I thought about it when doing the lift. However, something about a CJ and coils just doesn't seem right to me.
 
Tomken in Colorado makes a kit for CJ's should work on the scrambler.

The old Warn Black Diamond kit should work, I belive that they make a CJ kit.

Also Throttle Down Customs, Old Advanced Frame Works, sells a complete new frame ready for TJ axels and suspension, but designed with CJ style factory body mounts in CJ-7, Scrambler, and Bobbed Scrambler lengths. Great quality and probably double the strength of a factory frame. But costs about $2.5k. So if you need a new frame anyway and want coils this is a good way to go.

See Matt about his frame for comments on AFW, and coils.

Carl
 
Black Diamond coil kit

Black Diamond makes one for a CJ8 (Warn sold off the division). 4 Wheel Drive Hardware sells them 4wd.com. They are pretty pricey but I have always dreamed of having one.

One catch with their set up though is they are axle specific when you order them, so if you plan on upgrading your axles do that first before you buy the kit. I've only heard good things about the kit.

Good luck.
 
websterCJ8 said:
Black Diamond makes one for a CJ8...

One catch with their set up though is they are axle specific when you order them, so if you plan on upgrading your axles do that first before you buy the kit. I've only heard good things about the kit.

Can you elaborate on the statement about the axles? Personally, I wouldn't buy any kit that locked me into a certain axle selection.

Craig
 
1x1_Speed_Craig said:
Can you elaborate on the statement about the axles? Personally, I wouldn't buy any kit that locked me into a certain axle selection.

Craig

When ordering you need to order the correct part # that is specified for the axle you are running. For example, there is a different rear suspenstion part # for a Model 20 axle than a Dana 44. I believe that it is related to how the kit attaches to the axle tube and the differances in diameters.

Now I don't know for sure that you can't change axles after purchasing the kit, I was just pointing out that if you know you will be changing axles in the near future do that first. You maybe able to order those parts that make the kits unique from Black Diamond and then change axles. That would be something that you would want to investigate before purchasing a kit.
 
I have heard the Tomken and Pro-Comp kits were really "Vague" feeling on-road. Lots of body roll... anyone else heard this?
 
1x1_Speed_Craig said:
Can you elaborate on the statement about the axles? Personally, I wouldn't buy any kit that locked me into a certain axle selection.

Craig
I installed one of these "kits" a couple of years ago. You have to understand what it takes to install one of these. You remove almost all of the stock suspension mounting points on the frame and axles. You then have to weld all new brackets to both the axle and frame. This is not like changing axles on a leaf spring rig. To change axles once the brackets have been welded on would be at least a pain, and worse, would probably destroy some of the brackets in the process of removal. Not that it can't be done, but better planning on what axles you want to run over the long term would make more sense going into this conversion.
They do make the kits with specific brackets for specific axles. They can be modified fairly easily to fit another axle if you have some fab skills.
 
wmcurryjr said:
Hi,

Excuse my ignorance. Can a stock CJ8 frame be changed over for coil springs front and back like the new TJ frames? Is there a kit out there? Any information would be appreciated.

Wally
Yes, they can. I designed and built a rear 4 link, front radius arm set-up for my Scrambler. I think it works very well. Rides better than my stock leaf spring Scrambler, articulates great and climbs like a goat.
One of these days I'll actually finish and post the build-up of this. :rolleyes:
Mike
 
Curly springs?

jeepflex2-1.jpg


Radius arm front, 4 link rear. I really like the radius arm front on the highway. No brake dive. Flexes as good as SOA offroad but no axlewrap. I think I need a small sway bar on the back to even out the flex. The radius arms kinda act like their own sway bar.

Yep, needs a track bar. My brother found out when he tried to steal my shop space, and the bar wasn't on.
 
quick question to add to the thread:

anybody running a 3-link front ?? my thought was running a 3-link w/ full hydro steering to alleviate any bumpsteer associated with it (and coilovers).... does this sound roadworthy lol.....only issue would be it would have to handle 65 (max) on the interstate...
 
Last edited:
Whatever happened with the LJ/Scrambler hybrid Ilovetrains was doing, been a few months since I recall seeing him around here?

You could just throw that ol' 8 tub on an LJ frame and get your coil suspension.
Paul
 
They don't have it listed on their site, or I don't think they do, but I know that they have done many of these conversions.

http://www.claytonoffroad.com/

You can contact them. They love doing coils with long control arms. There are some sick videos on their site too.


Erik
 
Anyone think it'd be possible to build brackets that would bolt onto the axle spring perches in place of the leaf springs to mount link arms to? Would the flat spring perch provide enough resistance to axle wrap/rotation?

I found this (CJ-8 with coils) while searching for coil spring conversion kits for the CJ. He probably had the axle end mounts for the links put on by the builder of his custom axles, but it looks as if he used the leaf spring mounts for the frame end mount of the links.
 
If you're going through enough trouble to build the brackets yourself, just weld them to the axle and be done.
 
I'm not a welder so bolt-on would be easier as well as reversible. If I had to have the brackets made by a shop, at least I wouldn't have to have them welded on as well so it may cost less.
 
I wouldn't trust either the spring perches or the spring hangers to hold up. Bolt on is not going to be practical. Thos spring hangers are known to rip off even with leaf springs. I don't want to try to explain it, but the lower links in a link suspension push about 3 times harder than leaf springs do.
 
Back
Top