TheDustyRag
Member
- City
- Pittsburgh
- State
- Pa
Well maybe not built just yet but I'm building it now! I'm here to finally start a build thread. I posted in the lurker thread a while back but am now just getting around to starting this. I've been working away at the body work and have made some good progress. I wish I would have started this earlier but better late then never. I'll try and sum up where I'm at so far and what my plans are for the build. Please feel free to let me know what you think and if there's any advice you can give. I'm no master craftsman when it comes to restorations but it is something I love to do in my free time. I've done some body work in the past fixing floor pans, rocker panels and helping my dad with a restoration but this is my first full on build from the ground up. I've worked really hard to get to a position where I can finally do my first build and I'm stoked it's an 8! My plan for the scrambler is to build it mostly stock looking with a modern drivetrain. No extreme rock crawling planned for this thing but I do plan to use it a lot. And by a lot I mean I want to drive this thing everywhere, in all weather conditions, camp, fish, and explore the wilderness. I am hoping the rig will last me many years/miles and when it's all tired out I'll build it again.
What I've got so far / how I bought it:
1981 Scrambler
Sherwood Green Metallic. Code C1
No Engine or Transmission
Dana 300
Rusty but fixable body
Rusty Frame
Good floor pans and bed
Narrow Track 3.31 with Trac-loc
So maybe not starting with too much lol. But that's ok, I'm planning to replace most of this anyhow. If I started with something complete and in great shape I'd be more inclined to stick to originality. It'll make more sense when you see my goals below. In all honesty though, I'm just happy to have found a scrambler at all.
Goals:
Engine - Cummins R2.8 turbo diesel engine
Transmission - TR-4050
Transfer case - Keeping the Dana 300
Frame - Throttle Down Kustoms (Ordered and on the way!)
Axles - Wide Track Dana 30 and AMC 20. (Traded some old XJ parts for these. Has a Detroit Trutrac but only usable with the 2.73 gears)
Lift - I'm thinking 2.5 lift. Probably YJ OME. (Suggestions would be awesome)
Tires - I am thinking 31x10.5r15. I was planning 33x10.5r15 for the longest time but the more I think about it I like the 31s more and more.
I've got tons of other thoughts and ideas I keep bouncing around for the future for this thing. Like building a custom rack for a rooftop tent, building a hardtop, or going crazy and building a truck top camper to fit the whole family someday. But for now I just want a good traveling mini truck I can put the miles on that'll get me to a cool camp site and I'll put up a tent when I get there.
Anyway, here's some pictures of when I got it and of the progress so far. I've cutout and replaced a couple body mounts, replaced a floor support, put in new toe boards, and painted the underside front section. Cutting out the rot in the rear area now.
Feel free to ask me any questions you may have about the build or what I've done so far. I plan to be as active here as possible.









Also, I've started an Instagram which I'll post progress more regularly but with less explanations. It's @overlandcj8.
Lastly, I can't say enough how stoked I am to be here getting to do this build and thankful for all the posts you guys have made already. The history of posts made by this community has already helped me out a ton with my build progress and decisions. You all are truely great. Thank you!
What I've got so far / how I bought it:
1981 Scrambler
Sherwood Green Metallic. Code C1
No Engine or Transmission
Dana 300
Rusty but fixable body
Rusty Frame
Good floor pans and bed
Narrow Track 3.31 with Trac-loc
So maybe not starting with too much lol. But that's ok, I'm planning to replace most of this anyhow. If I started with something complete and in great shape I'd be more inclined to stick to originality. It'll make more sense when you see my goals below. In all honesty though, I'm just happy to have found a scrambler at all.
Goals:
Engine - Cummins R2.8 turbo diesel engine
Transmission - TR-4050
Transfer case - Keeping the Dana 300
Frame - Throttle Down Kustoms (Ordered and on the way!)
Axles - Wide Track Dana 30 and AMC 20. (Traded some old XJ parts for these. Has a Detroit Trutrac but only usable with the 2.73 gears)
Lift - I'm thinking 2.5 lift. Probably YJ OME. (Suggestions would be awesome)
Tires - I am thinking 31x10.5r15. I was planning 33x10.5r15 for the longest time but the more I think about it I like the 31s more and more.
I've got tons of other thoughts and ideas I keep bouncing around for the future for this thing. Like building a custom rack for a rooftop tent, building a hardtop, or going crazy and building a truck top camper to fit the whole family someday. But for now I just want a good traveling mini truck I can put the miles on that'll get me to a cool camp site and I'll put up a tent when I get there.
Anyway, here's some pictures of when I got it and of the progress so far. I've cutout and replaced a couple body mounts, replaced a floor support, put in new toe boards, and painted the underside front section. Cutting out the rot in the rear area now.
Feel free to ask me any questions you may have about the build or what I've done so far. I plan to be as active here as possible.










Also, I've started an Instagram which I'll post progress more regularly but with less explanations. It's @overlandcj8.
Lastly, I can't say enough how stoked I am to be here getting to do this build and thankful for all the posts you guys have made already. The history of posts made by this community has already helped me out a ton with my build progress and decisions. You all are truely great. Thank you!






