






My cardboard mock up in my Scrambler 
That is a fantastic build Randy!I’ll be building my own, but that’s a long ways down the road. Probably one of the last things.
I just finished building a console for my Silverado. I looked at Tuffy and I like their product. However, I have found that overall console design is lacking for my needs. Consoles that are tall seem to be black holes that stuff gets tossed into- for the footprint they are tall and deep. This leads to having to root through to find what you’re looking for, and making it harder to find the seat belt or move around in the seat. So I built one that is level with the top of the seat cushion. While my design for the Silverado incorporated a hidden lock box and a subwoofer, the floor area of a Scrambler would make a nice platform for a low shallow console from the bulkhead step to behind the shifter. I’m thinking about 6” deep and 10” wide. Several separate compartments- and one that is secure. I have a cardboard mock-up in my Scrambler now, but that will change.
A console can be built with minimal tools from 5/8” MDF, covered in marine vinyl and carpet. The secure compartment can be a commercially available gun lock box incorporated into the design.
Here’s what I built for the Silverado. The seats are very tall and I made room for a sub, but you get the idea. After living with it for a month or so, I’m very happy with the design. I added a cup holder, phone, and sunglasses pocket piece to the front. It’s one of those slimline things designed to tuck between a seat and console. Got it off Amazon.
Here’s the Silverado console build.
View attachment 99554View attachment 99556View attachment 99557View attachment 99558View attachment 99559View attachment 99560View attachment 99561My cardboard mock up in my Scrambler View attachment 99562





I bought a yj center console for 40 bucks on ebay. It was a gamble but worked out well.I need one. Seems hard to find oem originals? Also open to aftermarket.
Any recommendations!?
Got a link to that console? I just searched their site and could not find it.
To the bulkhead shelf and then to some tabs on the trans tunnel cover.Randyzzz, how will you attach it, both to the bulkhead shelf and the floor closer to your shift stick?
OK, to follow up, I got some plasti-krylon paint that's a close match. 3 coats later I just need to screw it down.I bought a yj center console for 40 bucks on ebay. It was a gamble but worked out well.
I painted it with krylon outdoor plastic spray paint, to match my nutmeg & it came out great.
I'll post a pic tomorrow.
The bottom curvature exactly matches the CJs.
They are a little bit narrower than a cj but this will do perfectly, for now until I get a proper one.
Also, I bought a generic lock & key to replace the one it came with (without a key)
Very cool! And what kind of Seat cover is that on the passenger side!?OK, to follow up, I got some plasti-krylon paint that's a close match. 3 coats later I just need to screw it down.
I'm not thrilled with the color but repainting it will be easy.
Here are those pics:
Randyzzz did you ever finish the CJ console? If so, do you have pics?I’ll be building my own, but that’s a long ways down the road. Probably one of the last things.
I just finished building a console for my Silverado. I looked at Tuffy and I like their product. However, I have found that overall console design is lacking for my needs. Consoles that are tall seem to be black holes that stuff gets tossed into- for the footprint they are tall and deep. This leads to having to root through to find what you’re looking for, and making it harder to find the seat belt or move around in the seat. So I built one that is level with the top of the seat cushion. While my design for the Silverado incorporated a hidden lock box and a subwoofer, the floor area of a Scrambler would make a nice platform for a low shallow console from the bulkhead step to behind the shifter. I’m thinking about 6” deep and 10” wide. Several separate compartments- and one that is secure. I have a cardboard mock-up in my Scrambler now, but that will change.
A console can be built with minimal tools from 5/8” MDF, covered in marine vinyl and carpet. The secure compartment can be a commercially available gun lock box incorporated into the design.
Here’s what I built for the Silverado. The seats are very tall and I made room for a sub, but you get the idea. After living with it for a month or so, I’m very happy with the design. I added a cup holder, phone, and sunglasses pocket piece to the front. It’s one of those slimline things designed to tuck between a seat and console. Got it off Amazon.
Here’s the Silverado console build.
View attachment 99554View attachment 99556View attachment 99557View attachment 99558View attachment 99559View attachment 99560View attachment 99561My cardboard mock up in my Scrambler View attachment 99562