93_Fummins
CJ-8 Member
- City
- Edmond
- State
- OK
The D300 is a close relative to the D20. It has a better low range, better bearings, and helically cut gears but operation is similar.
The newer chain drive cases are “shift on the fly” and that’s what makes them so nice. But- they only “shift on the fly” if the front hubs are already engaged.
Isn't the Dana 18/20 a sliding gear engagement versus a dog collar? That would explain the needing to stop to shift it, because you physically have to engage the gears from the helical high range to the straight cut low range. The dog collar type gear cases, like D300 and NP205, have the actual gears in mesh all the time, but use a collar to attach the outupts to the desired ratio. The dog collar cases can in fact be "shifted on the fly" from 4wd to 2wd to 4wd, but you have to relieve torque momentarily for the dogs to unload, such as blipping the throttle. I've ran twin sticked NP205's for years, which are dog collar gear drive boxes, and could engage or disengage the front on the fly by just applying pressure to the stick and lifting the throttle for a second. Granted, twin sticking probably makes it much easier than single stick.
