• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Check out this very cool scrambler

But---if you come out here---I'll show ya some of the best wheelin around when we are done :D
 
GarScramb said:
Also, I don't view his post as spam at all, personally. The guy took the time to register on the board and if you look at his profile, he put in all his personal info including real name, etc. Spammers hide behind their anonymity. He's a guy that's proud of his work, as he should be.
Good luck with the business, Brad.

-Gary

I agree with Gary. The title was "check out this very cool scrambler." I thought they were both "very cool" so I wasn't sure which one he was referring to! Nice work, there Brad!

(And welcome to the board!)

I want to put a 700r4 in one of my cj8s, but am wondering how much of an issue front driveshaft clearance past the tranny pan is going to be. Any comments or advice from your experience?

-Mike
 
It depends on if you put a CV on it or not. A CV will move the shaft closer to the pan since the roating area is farther from the flange. But thats an easy fix, you just gotta possably notch the edge of the pan. Also this depends on what front diff you have/how far the center of the pinion is from the passenger leaf.
 
My apology

Sorry for the venomous post, I didn't mean to be a jerk. I apologize. guess I was in a bad mood last night.

Jay:o
 
hope you like...

Thanks for the welcome everyone, glad to see so many scrambler lovers.
I hope you like what you saw. Built this scrambler for a family down in south florida. I build all my own cages and bumpers etc.. The scrambler has a ARB Safari snorkle for YJ. I built my own filter box and ducted it with 3" stainless brake duct to the ram jet.
Brad
 
I like the Scramblers! Looks like you do good work and I don't mind you tooting your horn a little...It ain't bragging if you've done it! Great job! Welcome to the board!
 
Mean spirted

A guy put up one post and some folks are ready to attack him, I know that there has been a lot of blatant SPAM lately, but, I am starting to feel that many folks that frequent this site are just plain mean spirted, if its not stock and redone to factory specs than it is wrong. I like to look at everybody's jeeps and get Idea, as I build mine. I put up a new part that I bought last night and started getting crap for it. Welcome people and see what they are all about first then attack if you just have to. By the way, I am starting to turn my build into a more "fire power" type
 
Dirty Dave said:
A guy put up one post and some folks are ready to attack him, I know that there has been a lot of blatant SPAM lately, but, I am starting to feel that many folks that frequent this site are just plain mean spirted, if its not stock and redone to factory specs than it is wrong. I like to look at everybody's jeeps and get Idea, as I build mine. I put up a new part that I bought last night and started getting crap for it. Welcome people and see what they are all about first then attack if you just have to. By the way, I am starting to turn my build into a more "fire power" type

I'll happily explain myself, he put up a link to a commercial site with no other info, intro, description, anything (yes it had scramblers on it, I give you that).

Since then he's come back and explained more about himself and what he's about and now I have welcomed him and asked for him to share more about what he's done with Scramblers.

Now that is said, you HAVE to be kidding about "if its not stock and redone to factory specs than it's wrong"... mine's a long way from that (and I'd say that the big majority of frequent visitors are the same way) and I've NEVER felt like this, not even remotely. I compliment built rigs ALL THE TIME, as do TONS of other folks on here.

If you think people here are mean spirited, go to a Civic forum, an Acura forum, Pirate4x4, etc. etc. etc. you can't find a better, more accepting, more helpful group of people on a forum anywhere.

Are you talking about the EGR plate post? I honestly asked you what they were used for, what the advantages/disadvantages were I did not know. I don't see where anyone was giving you crap about that????

Look at the top 15 posters on this forum, the top 14 all have rather significantly built Scramblers (at least a good long way from stock by any definition) and the 15th is a mad Toyota fabrication freak ;) that built one of the sickest rigs on this board (Zero2Wow).

All I can say after all of that is..... post some pics of that "more power" build of yours and let's see what kind of comments you get ;) :D
 
reply

Just call it as I see it, and I know, that other sites have more "haters". But I read this site several times a day, when I can, and I have read alot of hating. I working on trucks is like art, I dont see why some one would want a lowrider, but I appreciate the work, time, ideas and effort that they put into what they like. I guess what i want to say is "if you cant say anything nice, then dont say anything". You can allways PM someone that you have something to get off your chest to. And as far as the EGR block off goes, it is simple what it does, same as a fuel pump block off plate, no advantages or diavantages. I just thought that the things this guy machines in his husband /wife machine shop are cool. And now that I have got off my soapbox, I will shut up.
 
Last edited:
This scrambler was in a magazine not to long ago. Not sure which one, but I do know I was way impressed. So much so that I riped out the page to keep in my file of very nice jeeps. Brad, If your still with us I would like to find out the color of the orangey...gold color. That is sharp!
 
color

The color on the scrambler is PPG- Orange Glow over silver base. This is from the radiance line.
Brad
 
This is really unique. Built in step, trail corners, and slide protection. I like that. Where did you get the trail corners? Did you make them? Are they for sale?

mainphpg2_viewcoreDownloadItemg2_itemId1-1.jpg
 
That is one nice jeep.......keep up the good work and I welcome your posting!!! High dollar rigs are always fun to drool over......I like the color too....very sharp:D I sincerely hope he wheels the wee out of it with those gorgeous rockcrusher 60's under there!
-Will
 
Last edited:
rear trail corners

These rear corner protectors started as Poisen Spyders Scrambler corner protectors. I cut them down a bit and added the tube work. These are nice pieces made from 3/16" steel, decent fit. You need to do some hammer work around tail inght area if you get cutuot lights, this work is on the add on trail corner protector.
Brad
 
Dave... There have been many discussion here over the years about what a Scrambler "really is" but Eric is correct in the sense that many here have much less than stock rigs, I'm one. But you will find your purists here and they tend to speak up a little more, which is all good. All the discussions have always seemed to end with everyone agreeing that a Scrambler is a Scrambler when it originated that way and weather you decide to lengthen it or bob it its yours to do as you please. Mine was pristine bone stock one owner when I got it... not any more :eek: :D . I like your spirited take on it though... keep that going. Ask any of the long timers here... I always have...lol.

Brad are those PS armor with the rails welded on? They are super cool either way. look awesome and look like they would be quite effective. Really like the lower side slider/steps... great idea.

azpic-2.jpg


Indy-22.jpg
 
I'd be interested in some more info on those step-corners... I've got a huge hole there already on the postal. May as well make it useful lol
 
Back
Top