• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ 10a Tug Goes Offroad!!!!

Yes, they are pretty heavy. I may just cut them in half yet. Right now cash is pretty low, so I gotta keep those bumpers on there. When it's done, I will run it accross the scale and check the weight on it. This week, I have to order two front shocks and a rear drive shaft.
 
That would be cool to put a rear winch there, did not think of that.
 
put stock TJ flares on
tugbed001-1.jpg

tugbed006-1.jpg

LED's on back
tugbed004-1.jpg

found some LED reverse lights to go inside the rear bumper
tugbed005-1.jpg

had clearance issues with the front shaft and 727 auto. Had a thicker wall stock tube bullt with7 inch splines. Exhaust was cut and will be moved to drivers side
tugbed010.jpg

Rear got a CV shaft
tugbed008.jpg

tugbed009.jpg

Braking system is done, diffs and tc now filled with oil, fuel system is done and tug is running again. Need to flex it so I can measure for shocks. Going to have a single exhaust made with a stack behind the cab, they spray it all green.
 
Pretty cool with a V8. I would like to see some pics to see how much "finishing" it needs.
 
AWESOME!!! A stack on this thing will be the icing on the cake! :thumbsup:
 
Last edited:
I finally got to drive the Jeep up and down the street. I tried Low, 2wd. Can't wait to get it offroad with the 4:1 gears. Should work real well. 2wd High range, was not as slow as I thought off the line. No speed demon for sure, but that's not what I was looking for. Specs are close to that of a 258.
Hoping to finish the few small things this Saturday. Exhuast next week. Paint the following week.
Offroading May 6th!!!!!
 
Spent the day working on the tug. It's ready for exhaust this week and paint next week.
Used a forklift and picked up the DS front tire. Wanted to meause for my shocks.
tugflex007-1.jpg

Lot of flex in the front and the rear tire tucked in the fender nicely
tugflex009-1.jpg

Used the forklift to pick up the DS rear tire. The front really flexed. The PS tire was pushed into the fenderwell. Later did a little trimming at the bottom. Didn't measure the forklift, but it had the rear tire well over 3ft at one point.
tugflex010-1.jpg

tugflex012-1.jpg

tugflex011-1.jpg
 
Exhaust

The exhaust is basically done. All that is left is to paint it with black header paint. Exhaust runs up above the crossmember, next to the frame. Has a glasspack type muffler on it. Added a "flapper" on top just to be different. Exhaust has a nice "truck roar" to it when you get on it.
tugexhaust006-1.jpg

tugexhaust004-1.jpg

tugexhaust005-1.jpg

tugexhaust002-1.jpg


tugexhaust003-1.jpg
 
Rollbar

I was wondering what to do for a rollbar. The top will be coming off soon and figured I would probably need a cage. I have had cages before in a CJ 5 and 7. Always fun hitting your head on the spreader bar. Also, don't really have the money for a cage right now.
So, while at the junkyard, I found a Scrambler rollbar. Got it for $25. Going to modify it and put it in the bed, tying it to the frame. Hopefully will put it in on Sunday.
junkyard028.jpg
 
Not telling you what to do, but I'ed turn that exhaust flapper around. When you get up to speed the wind pressure will push it down and cause the engine to lose power or bog down. Happened to a buddy of mine.
Great looking build!
 
Modified the rollbar and got it mounted in the bed. Didn't get to tie it into the frame yet. Will be taking it back out for paint. Hopefully the Jeep will be painted by the end of the week.
rollbar001-1.jpg
 
Well, it's painted. I added 3 vinyl stars to it. I drove it for the 1st time without the top. Wow, the exhaust was pretty loud by my head. I may have to change that in the future. I actually drives pretty good on the road, around town. I had it on the highway for a few miles, 55 - 60mph. It will be trailered to the trails, since they are a good distance away. Will use it just to cruise town.
Took it in my yard and tested the 4wd. All seems fine. Taking it to OK4wd show in NJ on Saturday, Rausch Creek Offroad Park on Sunday.
Fit a bikini top for it in case of a shower this weekend.
When I drove it home, everyone stared at me. Dont know why. Went to get fuel and a guy walked up and asked to take some pics.
tugpainted009-1.jpg

tugpainted007-1.jpg

tugpainted005-1.jpg

tugpainted004-1.jpg

tugpainted001-1.jpg
 
Back
Top