• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ to YJ Springs- im confused

Loyalpoke

Legacy Registered User
Lifetime Member
City
Stillwater
State
ok
There is a fair amount of info about converting to YJ springs.
Since the YJ spring is longer, the hanger needs moved back and needs to be wider to accommodate a 2 1/2" wide spring. As i read, something doesn't make sense.

First, the hanger kits, like from MORE are bolt on. But the frame is enclosed, how do you put a nut on it? I know i can weld it, but...

Second, my hangers are 2 7/8" ID. how wide does the new one need to be? I think I may fab a new one or even modify the old ones.
 
There is a fair amount of info about converting to YJ springs.
Since the YJ spring is longer, the hanger needs moved back and needs to be wider to accommodate a 2 1/2" wide spring. As i read, something doesn't make sense.
The front hanger needs to move FORWARD, not back.
First, the hanger kits, like from MORE are bolt on. But the frame is enclosed, how do you put a nut on it? I know i can weld it, but...
The MORE hangers bolt on the same way as the stock hangers (same bolt holes and same bolts... they are just longer so the bushing eye is farther forward)
Second, my hangers are 2 7/8" ID. how wide does the new one need to be? I think I may fab a new one or even modify the old ones.
The hangers should be the same width as the springs.
 
Maybe i'm using the wrong terminology. On the front springs, the rear of the spring hangs does not have shackles. Is the part that is factory riveted and welded to the frame called a hanger? Will it need to be replaced or moved to hang yJ springs? I will need to move the front shackle hanger forward to accommodate the longer YJ springs.
 
I did a shackle reversal on mine and they did have to come off. stationary side spring hanger bracket. pretty sure they will have to come off and yj hangers reinstalled.
 
If you're not doing a shackle reversal, the part welded to the frame doesn't have to move, just the hangers that the shackles hang from. They move about one hole further away from the fixed end to accommodate the longer springs. Then you can either drill holes or use different perches to move the axle back to the center of the wheel opening. The front fixed hangers are wide enough for the YJ springs, as are the rears.
 
If you are just putting the new springs on. On the front springs, the rear frame mounted mount will work. I just took a pipe wrench and spread them (a little on each side). The Rubicon Express lift kit I installed on the cj8 uses the 2 1/2" springs with a custom shackle for the front of the spring. Sorry SHLTR2, I didn't catch the last part and repeated you.
 
No prob. :) Also worth mentioning is that the rear shackle hangers that are 2.5" wide work well for the front - just buy a new set, knock out the front crossmember rivet, and use that hole with the other and it's the right distance apart for the YJ front springs.
 
If you're not doing a shackle reversal, the part welded to the frame doesn't have to move, just the hangers that the shackles hang from. They move about one hole further away from the fixed end to accommodate the longer springs. Then you can either drill holes or use different perches to move the axle back to the center of the wheel opening. The front fixed hangers are wide enough for the YJ springs, as are the rears.

So you mean drill a new hole in the spring so axle slides back and is centered in the wheel well and correct for the drive shaft length, ect. Then the axle will not be centered on the spring, correct? and that is ok?
I am all stock, I don't think I have perches do I, am I missing something?
 
:) You don't want to drill any holes in the spring, just drill the perch (or grind a little space for the head of the spring center-bolt) AND the u-bolt plate; this allows the axle to come back to center in the opening and your driveshaft will still fit. Aftermarket perches can be had that have 3 different holes for that spring bolt to be in, according to where you want the axle. You're correct that the center-bolt is no longer directly below the center of the axle, but something like 3/4" or an inch off. This works fine.
 
Okay, I follow you now. I'll start ordering parts and get on it. Thanks for the help SHLTR2!
 
Back
Top